Thanks - the problem was bad ribbon cable connector, - it did not seem damaged, but eventually needed to be reassembled. Regards André
On 30 October 2012 09:33, Joerg Wunsch <[email protected]> wrote: > In article <CAA4d5X= > [email protected]> you write: > > >The major difference the last year, may be my Linux - maybe avrdude > >is updated ? no matter what I try to do, I get "avrdude: error: > >programm enable: target doesn't answer. 1 " > > Quite possible avrdude really changed in the meantime, but that > message looks like coming directly from the USBasp's firmware. > > >I cannot upgrade teh usbASP , because the cheap clones use OTP > >controller. > > I doubt that. After all, USBasp is AVR-based, and there are *no* OTP > AVRs at all. > > Of course, you could try using an older avrdude version, but I > suspect it's something else. > > >regarding the "avrdude: auto set sck period (because given equals null)" > >I's always been there, and it worked before. > > Anyway, you could give it a try to use an explicit -B value. > -- > cheers, J"org .-.-. --... ...-- -.. . DL8DTL > > http://www.sax.de/~joerg/ NIC: JW11-RIPE > Never trust an operating system you don't have sources for. ;-) > > _______________________________________________ > AVR-chat mailing list > [email protected] > https://lists.nongnu.org/mailman/listinfo/avr-chat > -- Hilsen André
_______________________________________________ AVR-chat mailing list [email protected] https://lists.nongnu.org/mailman/listinfo/avr-chat
