--- In Axapta-Knowledge-Village@yahoogroups.com, "d_udayreddy" <[EMAIL PROTECTED]> wrote: > Dear all > recently i am working wit AXAPTA 3.0 Sp3. > i want to know how do i need to attach Production resource tools like > Inserts, Jigs & Fixtures. > > Thanks in advance > uday
1. Set up a "tools" work center group and make the jigs, inserts, and other necessary work centers under the group. 2. On the routings you would have a primary step of a machine and a secondary of the tool. Also possible would be a secordary 2 of a machine operator. Hints: The tools WCG would have a resource type of Tool. The route step primary /secondary setting is the priority field. If using Operations scheduling then the WCG should only contain tools that are interchangeable (no mix of jigs AND inserts: jigs ONLY, etc.) and the route step should call the WCG rather than the specific WC. The primary operation determines the scheduling for the secondaries. Example Routing ABC 10 Primary Operation = Saw, WC = Saw1 10 Secondary 1 Operation = SJig, WC = Big Jig 10 Secondary 2 Operation = SOpr, WC = SOperator 1 20 Primary Clean, WC = Cleaning Station 1 30 Primary Inspect, WC = QA Inspector Hope this helps. Dick Howard BKD Technologies Indiana USA ------------------------ Yahoo! Groups Sponsor --------------------~--> Has someone you know been affected by illness or disease? Network for Good is THE place to support health awareness efforts! http://us.click.yahoo.com/Rcy2bD/UOnJAA/cosFAA/kGEolB/TM --------------------------------------------------------------------~-> Sharing the knowledge on Axapta. Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Axapta-Knowledge-Village/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/