HI Danny, Thanks for the response. We have setup the GL codes manually.
Yes we did run the dimensions wizard in FRx. We can only see 3 dimensions, and we have 6... it is not picking them up and the information inside them. it appears that that is how the code was written. Thanks Yifat --- In Axapta-Knowledge-Village@yahoogroups.com, "dannyband" <db...@...> wrote: > > > Yifat, > > You will only see the codes that have transactions against them, however you > can still set up other G/L codes and ranges and they will be used correctly > when they get transactions as well. > > As to you dimension issue, you didn't mention if you had run the FRx > dimension wizard, you need to run it in order to define what dimensions you > are going to use. > > > Thanks, > > Danny Band > Power IT Consulting Ltd. > > > > > --- In Axapta-Knowledge-Village@yahoogroups.com, "yifath1" <ymervis@> wrote: > > > > hello, > > > > We are running on AX 2009 SP1 and FRx version 6.7.1.0343.(SP10). > > > > FRx is not seeing the data in the dimensions tables in AX. > > Also we are not seeing all the COA codes that we setup in AX (only GL codes > > that have transactions against them are visible). > > > > We are using a virtual company to store the COA and Dimensions table. > > > > We have installed FRx, we have installed the service pack 10 and run the > > scripts. Still no luck. > > > > Can anyone help? or has had this problem? > > > > THanks > > > > Yifat > > >