On 9/19/05, Richard Bateman <[EMAIL PROTECTED]> wrote: > I did, actually, find my booting kernel w/ framebuffer support. > > http://bateman.dhs.org/~richard/tmp/arm/ > > use those files. rootfs.img.bz2 when unbziped is an ext2 image that I put on > the root of my sd card that gets automounted (if the sd card you have > works... aparently there are a few that don't). > > For me, using this haret, default.txt, and initrd, this boots up to a serial > console with a framebuffer enabled that shows you system messages and such. > > What I haven't gotten (because I ran into some technical difficulties) is a > kernel compiled from one of my source trees that works. this one was > compiled awhile back, and I don't remember which tree it came from :-/ > > I'll try to figure that out, but in the mean time you should be able to at > least see what it ought to look like here
I tried the files from your site (initrd, zImage and rootfs.img.bz2) with the haret.exe from your site (v3.6) and with the haret_uart.exe from Fisherss' site. I used the default.txt from fisherss' site (with all the GPIO initialisation calls). With the 3.6 version (which isn't correct for this machine, right?) the pda hangs (the screen just keeps showing the haret screen, and is unresponsive to stylus tabs and such), but what's strange is that if I reset the device, it just goes back into windows, without a hard reset. Fisherss' haret (haret_uart) has the same results (the hanging part), but when I reset, it's a hard reset. But either way, I still don't get framebuffer output. Is the kernel hanging because no serial cable is present? Am I using the wrong files? The modified date seems rather old on the files I tried. There seem to be 2 new files (zImage_for_cramfs_initrd and initrd.cramfs.gz). Should I try these instead (and alter the default.txt)? Greetz, JeDi > > Richard > -- > _______________________________________________ > Aximx50-port mailing list > [email protected] > https://www.handhelds.org/mailman/listinfo/aximx50-port > -- _______________________________________________ Aximx50-port mailing list [email protected] https://www.handhelds.org/mailman/listinfo/aximx50-port
