Doesn't seem to do mutch on a x51v... But i think i didn't format my SD Card Right, I don't have linux installed atm. (main pc bricked).
So i formatted it on an iBook, selected Unix File System as option. I guess that isn't ext2 then :( Jorge On 1/3/06, JeDi <[EMAIL PROTECTED]> wrote: > Any succes yet? The kernel boots, but the initrd doesn't seem to > start. The "echo" lines in the linuxrc file of the initrd should get > onto the screen, right? It's hard to read cause Fisherss forgot to > enable bigger fonts in the kernel he built for the x50v. > > So this kernel is getting as far as any kernel I've tried so far. > Could it be that something else is different on x50v? I formatted my > sd card with an ext2 partition too, and put the rootfs on that, but > obviously the kernel never tries to mount it. I get the same warning > about the read-only switch as you. > > I hope fisherss uploads the kernel sources soon, so I can experiment > with some kernel options. Also, I hope we can get a newer kernel > working (2.6.13), cause a lot has been done with the pxa drivers > there. > > Good luck! > > Greetz, > JeDi > > > On 1/3/06, Angel Sánchez Morales <[EMAIL PROTECTED]> wrote: > > No no, a SD card, a Sandisk Extreme III of 1GB :) > > > > > > My SD card mounted looks as follows: > > > > MeowPC ~ # mount /dev/sda1 /mnt/cardReader/ > > MeowPC ~ # ls /mnt/cardReader/ > > bin evdev.ko linuxrc opt sys usr > > boot h4000_ts_x50.ko lost+found proc tests var > > dev home media rootfs tmp x50_rootfs.tar.gz > > etc lib mnt sbin tsdev.ko > > > > > > Info on mount: > > /dev/sda1 on /mnt/cardReader type ext2 (rw) > > > > > > And for fdisk: > > > > MeowPC ~ # fdisk /dev/sda > > > > Command (m for help): p > > > > Disk /dev/sda: 1015 MB, 1015808000 bytes > > 32 heads, 63 sectors/track, 984 cylinders > > Units = cylinders of 2016 * 512 = 1032192 bytes > > > > Device Boot Start End Blocks Id System > > /dev/sda1 1 984 991840+ 83 Linux > > > > Command (m for help): > > > > > > > > Fisherss wrote: > > > CF disk? You mean CF card ? It's not supported currently. > > > > > > Angel Sánchez Morales wrote: > > > > > >> I put mirror mode on so i can see the kernel booting. > > >> About the sd format i used cfdisk to make a 1gig ext2 filesystem, > > >> without the boot flag, i stored all the data on the rootfs file. > > >> Perhaps it doesn't show the gui because i don't have the right > > >> filesystem :p > > >> > > >> > > >> Fisherss wrote: > > >> > > >>> yes, I uploaded it for 8-9 times, the connection always crashed, so I > > >>> am uploading it onto new server . > > >>> > > >>> Angel Sánchez Morales wrote: > > >>> > > >>>> In the X window system there's xstroke that recognizes handwritting :p > > >>>> It's funny to use, i have it on my desktop, but don't use it. > > >>>> > > >>>> I was contemplating fisherss webpage when i wondered why he put "3. > > >>>> (a) For x50v, download this tarball: " and "(b) For x50, download > > >>>> this tarball: " if the link is the same... and... voilà! > > >>>> There's a file in > > >>>> http://axim.narcotize.com/files/beta1/x50v/x50v_rootfs.tar.gz > > >>>> that is not fully uploaded, it weights 28K and doesn't untargz's > > >>>> correctly, so i should need that rootfs to boot the x50v. > > >>>> > > >>>> Fisherss, can you upload it correctly, or is the other link on your > > >>>> webpage the correct one? > > >>>> > > >>>> > > >>>> > > >>>> rada b. wrote: > > >>>> > > >>>>> Once X Window server, etc are working then its just a matter of > > >>>>> cross compiling. If Familiar is based off Gentoo I assume you can > > >>>>> use portage ebuilds? If so then you can look at > > >>>>> www.gentoo-portage.com. Some stuff is avalible for arm and other > > >>>>> stuff that isnt explicitly can be cross-compiled. > > >>>>> > > >>>>> */jp <[EMAIL PROTECTED]>/* wrote: > > >>>>> > > >>>>> by input i mean japanese input. ie handwriting recognition or > > >>>>> even just > > >>>>> standard keyboard input. > > >>>>> -- _______________________________________________ > > >>>>> Aximx50-port mailing list > > >>>>> [email protected] > > >>>>> https://www.handhelds.org/mailman/listinfo/aximx50-port > > >>>>> > > >>>>> > > -- > > _______________________________________________ > > Aximx50-port mailing list > > [email protected] > > https://www.handhelds.org/mailman/listinfo/aximx50-port > > > -- > _______________________________________________ > Aximx50-port mailing list > [email protected] > https://www.handhelds.org/mailman/listinfo/aximx50-port > -- ~Jorge -- _______________________________________________ Aximx50-port mailing list [email protected] https://www.handhelds.org/mailman/listinfo/aximx50-port
