JeDi wrote:
Any succes yet? The kernel boots, but the initrd doesn't seem to
start. The "echo" lines in the linuxrc file of the initrd should get
onto the screen, right? It's hard to read cause Fisherss forgot to
enable bigger fonts in the kernel he built for the x50v.

The "echo" lines appear only through your serial console, not on the screen. The size of fonts is suitable for x50, and I don't know what size x50v needs.
So this kernel is getting as far as any kernel I've tried so far.
Could it be that something else is different on x50v? I formatted my
sd card with an ext2 partition too, and put the rootfs on that, but
obviously the kernel never tries to mount it. I get the same warning
about the read-only switch as you.
The read-only warning is not the problem, I also have this warning line.
I hope fisherss uploads the kernel sources soon, so I can experiment
with some kernel options. Also, I hope we can get a newer kernel
working (2.6.13), cause a lot has been done with the pxa drivers
there.
I am uploading it. About the newest kernel, I have tried CVS version, but looks like something is aximx30.c file is incorrect, it cant pass compiling process.
Good luck!

Greetz,
JeDi


On 1/3/06, Angel Sánchez Morales <[EMAIL PROTECTED]> wrote:
No no, a SD card, a Sandisk Extreme III of 1GB :)


My SD card mounted looks as follows:

MeowPC ~ # mount /dev/sda1 /mnt/cardReader/
MeowPC ~ # ls /mnt/cardReader/
bin   evdev.ko         linuxrc     opt     sys       usr
boot  h4000_ts_x50.ko  lost+found  proc    tests     var
dev   home             media       rootfs  tmp       x50_rootfs.tar.gz
etc   lib              mnt         sbin    tsdev.ko


Info on mount:
/dev/sda1 on /mnt/cardReader type ext2 (rw)


And for fdisk:

MeowPC ~ # fdisk /dev/sda

Command (m for help): p

Disk /dev/sda: 1015 MB, 1015808000 bytes
32 heads, 63 sectors/track, 984 cylinders
Units = cylinders of 2016 * 512 = 1032192 bytes

    Device Boot      Start         End      Blocks   Id  System
/dev/sda1               1         984      991840+  83  Linux

Command (m for help):



Fisherss wrote:
CF disk? You mean CF card ?  It's not supported currently.

Angel Sánchez Morales wrote:

I put mirror mode on so i can see the kernel booting.
About the sd format i used cfdisk to make a 1gig ext2 filesystem,
without the boot flag, i stored all the data on the rootfs file.
Perhaps it doesn't show the gui because i don't have the right
filesystem :p


Fisherss wrote:

yes, I uploaded it for 8-9 times, the connection always crashed, so I
am uploading it onto new server .

Angel Sánchez Morales wrote:

In the X window system there's xstroke that recognizes handwritting :p
It's funny to use, i have it on my desktop, but don't use it.

I was contemplating fisherss webpage when i wondered why he put "3.
(a) For x50v, download this tarball: " and "(b) For x50, download
this tarball: " if the link is the same... and... voilà!
There's a file in
http://axim.narcotize.com/files/beta1/x50v/x50v_rootfs.tar.gz
that is not fully uploaded, it weights 28K and doesn't untargz's
correctly, so i should need that rootfs to boot the x50v.

Fisherss, can you upload it correctly, or is the other link on your
webpage the correct one?



rada b. wrote:

Once X Window server, etc are working then its just a matter of
cross compiling.  If Familiar is based off Gentoo I assume you can
use portage ebuilds?  If so then you can look at
www.gentoo-portage.com. Some stuff is avalible for arm and other
stuff that isnt explicitly can be cross-compiled.

*/jp <[EMAIL PROTECTED]>/* wrote:

    by input i mean japanese input. ie handwriting recognition or
even just
    standard keyboard input.
    --     _______________________________________________
    Aximx50-port mailing list
    [email protected]
    https://www.handhelds.org/mailman/listinfo/aximx50-port


--
_______________________________________________
Aximx50-port mailing list
[email protected]
https://www.handhelds.org/mailman/listinfo/aximx50-port

--
_______________________________________________
Aximx50-port mailing list
[email protected]
https://www.handhelds.org/mailman/listinfo/aximx50-port

Reply via email to