Have a look here: http://www.handhelds.org/moin/moin.cgi/PrebuiltToolchains
Good luck! Greetz, JeDi On 1/6/06, Michael Cutler <[EMAIL PROTECTED]> wrote: > Hi All, > > I have been lurking here since getting a Dell Axim x50v at Christmas. I > read through the archives and based on that advice tried to get Linux > working but as yet have had no luck getting my x50v to do anything. > > Firstly I'm not entirely clear as to the status of the x50v stuff. I > appreciate that the touch screen on the x50 was only cracked a few weeks > ago but I'm keen to get even a crippled Linux up and running. > > On Tuesday I set about trying to get a cross-compile environment up and > running and so far had also had no success. I have a substantial > background in Linux although I'm new to handheld stuff, surely it can't > be THAT difficult to get started. > > I attempted to manually setup a cross-compile environment based on > googling about it and finding pages / Usenet posts, however I hit a > dead-end installing GCC: > > /usr/local/arm-linux/bin/ld: crti.o: No such file: No such file or directory > > After trying various things I gave up on that approach when I found > 'crosstool'. My first attempt with crosstool failed drastically on my > i686 Fedora Core 4 development box. My second attempt with a i686 RedHat > Linux 9 machine was far more successful, but only after 'hacking' > crosstool to skip the 'testhello.sh' stage which failed with compile errors. > > By this point I had a 'working' (compiled/installed) arm-linux gcc, > glibc etc. I grabbed the kernel from cvs.handhelds.org, did 'make > menuconfig ARCH=arm' then tried 'make' which died with: > > CHK include/linux/version.h > SPLIT include/linux/autoconf.h -> include/config/* > SYMLINK include/asm-arm/arch -> include/asm-arm/arch-rpc > CC arch/arm/kernel/asm-offsets.s > In file included from include/asm/page.h:27, > from include/asm/cpu-single.h:33, > from include/asm/proc-fns.h:158, > from include/asm/system.h:96, > from include/asm/bitops.h:22, > from include/linux/bitops.h:77, > from include/linux/thread_info.h:20, > from include/linux/spinlock.h:12, > from include/linux/capability.h:45, > from include/linux/sched.h:7, > from arch/arm/kernel/asm-offsets.c:13: > include/asm/glue.h:111:2: #error Unknown data abort handler type > In file included from include/asm/cpu-single.h:33, > from include/asm/proc-fns.h:158, > from include/asm/system.h:96, > from include/asm/bitops.h:22, > from include/linux/bitops.h:77, > from include/linux/thread_info.h:20, > from include/linux/spinlock.h:12, > from include/linux/capability.h:45, > from include/linux/sched.h:7, > from arch/arm/kernel/asm-offsets.c:13: > include/asm/page.h:92:2: #error Unknown user operations model > make[1]: *** [arch/arm/kernel/asm-offsets.s] Error 1 > make: *** [arch/arm/kernel/asm-offsets.s] Error 2 > > Before continuing to hack my way around it, I thought I would ask on the > list how you all setup your environments and what sort of mileage you've > been having with the x50v. > > Any help would be greatly appreciated. > > Cheers, > > Michael Cutler > -- > _______________________________________________ > Aximx50-port mailing list > [email protected] > https://www.handhelds.org/mailman/listinfo/aximx50-port > -- _______________________________________________ Aximx50-port mailing list [email protected] https://www.handhelds.org/mailman/listinfo/aximx50-port
