Mirror mode is on, and I have version A05.

Still freezes.

ons, 11,.01.2006 kl. 11.44 -0900, skrev Nick Jaksic:
> make sure mirror mode is on and that you have A03 and above
> Nick Jaksic, SSE
> Applied Microsystems, Inc.
> http://www.amicro.biz
> [EMAIL PROTECTED]
> Office: (907) 261-8300
> Fax: (907) 562-8507
> 
> 
> Halvor Borgen wrote: 
> > I finally got a cardreader and a SD-card to try this out.
> > 
> > I copy your files onto the card, but when I try to run haret, it just
> > freezes and I have to hardreset. This happens every time!
> > 
> > -Halvor
> > 
> > man, 09,.01.2006 kl. 16.11 +0100, skrev JeDi:
> >   
> > > Hi,
> > > 
> > > I created files for the x50v, which runs linux right from a normal
> > > fat32 sd card. I put the files on
> > > http://lumumba.uhasselt.be/~jedi/x50v-linux/
> > > Just copy all files there on an sd card (in fact, you can choose where
> > > to but these, but the x50v-rootfs.img has to be in the root dir of the
> > > sd card), enable mirror mode, run haret_uart.exe, press run, and watch
> > > linux boot into OPIE.
> > > 
> > > I used Fisherss beta kernel sources, but I compiled in some bigger
> > > fonts and a nice penguin on top of the screen :-)
> > > 
> > > Some technical info:
> > > The initrd that gets loaded starts a script that mounts the fat32 sd
> > > card, and after that mounts the root filesystem from the
> > > x50v-rootfs.img ext2 image file on the sd card. Then it chroots to the
> > > new root filesystem and boots as normal.
> > > 
> > > The ext2 image I created is 63 MB, so people can still put it on a
> > > 64MB SD card, but there's only about 9 MB free disk space in the
> > > image. I'm not sure that'll be enough in the future, but it boots for
> > > now.
> > > 
> > > I don't have a regular x50, so I can't create (or actually, test)
> > > files for that device, but people that can mount the initrd that I've
> > > created can look in the /linuxrc file. Apart from editing that file, I
> > > also had to copy some modules from the kernel (vfat and dependencies,
> > > loop) and create some /dev files for the loop device to work.
> > > 
> > > 
> > > X50v guys (or girls), please try this, and report if it works! If you
> > > get a screen fading to white when you press run, just reset and try
> > > again. I had that problem too, don't know what it is. And again, don't
> > > forget to enable mirror mode (Settings/screen) or you won't see a
> > > thing!
> > > 
> > > Greetz,
> > > JeDi
> > >     
> > 
> >   

-- 
_______________________________________________
Aximx50-port mailing list
[email protected]
https://www.handhelds.org/mailman/listinfo/aximx50-port

Reply via email to