No, the buttons don't work now.

Halvor Borgen wrote:
> NICE!
>
> Moved everything but the img to a subfolder, hard-reset --> haret ==
> WHAM BAM THANK YOU MAM.
>
> The kernel spews out quite a lot of stuff in the start, so goddamn good
> to watch it boot =)
>
> If the touchpad just used the correct calibration data..
>
> Is there a way of using the power button to turn it off in opie? Like in
> wm2003se to save power.
>
> ons, 11,.01.2006 kl. 11.55 -0900, skrev Nick Jaksic:
>   
>> are there any other files on your sd card?
>> you can have other sub folder on it but no other files on the root.
>> sometimes it take me few tries.
>>
>> Halvor Borgen wrote: 
>>     
>>> Mirror mode is on, and I have version A05.
>>>
>>> Still freezes.
>>>
>>> ons, 11,.01.2006 kl. 11.44 -0900, skrev Nick Jaksic:
>>>   
>>>       
>>>> make sure mirror mode is on and that you have A03 and above
>>>> Nick Jaksic, SSE
>>>> Applied Microsystems, Inc.
>>>> http://www.amicro.biz
>>>> [EMAIL PROTECTED]
>>>> Office: (907) 261-8300
>>>> Fax: (907) 562-8507
>>>>
>>>>
>>>> Halvor Borgen wrote: 
>>>>     
>>>>         
>>>>> I finally got a cardreader and a SD-card to try this out.
>>>>>
>>>>> I copy your files onto the card, but when I try to run haret, it just
>>>>> freezes and I have to hardreset. This happens every time!
>>>>>
>>>>> -Halvor
>>>>>
>>>>> man, 09,.01.2006 kl. 16.11 +0100, skrev JeDi:
>>>>>   
>>>>>       
>>>>>           
>>>>>> Hi,
>>>>>>
>>>>>> I created files for the x50v, which runs linux right from a normal
>>>>>> fat32 sd card. I put the files on
>>>>>> http://lumumba.uhasselt.be/~jedi/x50v-linux/
>>>>>> Just copy all files there on an sd card (in fact, you can choose where
>>>>>> to but these, but the x50v-rootfs.img has to be in the root dir of the
>>>>>> sd card), enable mirror mode, run haret_uart.exe, press run, and watch
>>>>>> linux boot into OPIE.
>>>>>>
>>>>>> I used Fisherss beta kernel sources, but I compiled in some bigger
>>>>>> fonts and a nice penguin on top of the screen :-)
>>>>>>
>>>>>> Some technical info:
>>>>>> The initrd that gets loaded starts a script that mounts the fat32 sd
>>>>>> card, and after that mounts the root filesystem from the
>>>>>> x50v-rootfs.img ext2 image file on the sd card. Then it chroots to the
>>>>>> new root filesystem and boots as normal.
>>>>>>
>>>>>> The ext2 image I created is 63 MB, so people can still put it on a
>>>>>> 64MB SD card, but there's only about 9 MB free disk space in the
>>>>>> image. I'm not sure that'll be enough in the future, but it boots for
>>>>>> now.
>>>>>>
>>>>>> I don't have a regular x50, so I can't create (or actually, test)
>>>>>> files for that device, but people that can mount the initrd that I've
>>>>>> created can look in the /linuxrc file. Apart from editing that file, I
>>>>>> also had to copy some modules from the kernel (vfat and dependencies,
>>>>>> loop) and create some /dev files for the loop device to work.
>>>>>>
>>>>>>
>>>>>> X50v guys (or girls), please try this, and report if it works! If you
>>>>>> get a screen fading to white when you press run, just reset and try
>>>>>> again. I had that problem too, don't know what it is. And again, don't
>>>>>> forget to enable mirror mode (Settings/screen) or you won't see a
>>>>>> thing!
>>>>>>
>>>>>> Greetz,
>>>>>> JeDi
>>>>>>     
>>>>>>         
>>>>>>             
>>>>>         
>>>>>           
>>>   
>>>       
>
>   
-- 
_______________________________________________
Aximx50-port mailing list
[email protected]
https://www.handhelds.org/mailman/listinfo/aximx50-port

Reply via email to