Who handles haret patches?  I've emailed the author on a couple
occasions with fixes to bugs and an improvement to the build scripts
but I've had no reply.

Chris


On 1/13/06, Michael Cutler <[EMAIL PROTECTED]> wrote:
> LOL
>
> http://www.intel.com/design/pca/applicationsprocessors/manuals/280000.htm
> &
> http://www.intel.com/design/pca/applicationsprocessors/faq/pxa27x_faq.htm
>
> I was suprised it has it's own USB 1.1 OHCI Host Controller on board ;)
>
>
> Michael
>
>
> Angel Sánchez Morales wrote:
> > Hey, give us the link, NOW! :p
> > I think it'll be perfect for when i have to look at usb networking :)
> >
> > I remember we had another manual, the one of 2700G iirc...
> > Well, could you point at where is it? :)
> >
> >
> > Michael Cutler wrote:
> >
> >> I've just discovered the "Intel(r) PXA27x Processor Family Developer's
> >> Manual" and its like Christmas! lots of promising information in it.
> >> If only I knew what to do with it :D
> >>
> >> ;)
> >>
> >> Michael
> >>
> >>
> >> Bernd Froemel wrote:
> >>
> >>> Attached you find a small patch to support 119 instead of 84 gpios.
> >>> Apply only to pxa270.
> >>>
> >>> Bernd
> >>>
> >>>
> >>> ------------------------------------------------------------------------
> >>>
> >>> diff -Nupr haret/src/gpio.cpp haret-new/src/gpio.cpp
> >>> --- haret/src/gpio.cpp    2004-01-10 18:37:18.000000000 +0100
> >>> +++ haret-new/src/gpio.cpp    2006-01-13 10:43:52.000000000 +0100
> >>> @@ -13,17 +13,26 @@
> >>>  #include "output.h"
> >>>
> >>>  // Which GPIO changes to ignore during watch
> >>> -uint32 gpioIgnore [3] = { 0, 0, 0 };
> >>> +uint32 gpioIgnore [4] = { 0, 0, 0, 0 };
> >>>
> >>>  void gpioSetDir (int num, bool out)
> >>>  {
> >>> -  if (num > 84)
> >>> +  if (num > 118)
> >>>      return;
> >>>
> >>>    uint32 *gpdr = (uint32 *)memPhysMap (GPDR);
> >>> -  uint32 ofs = num >> 5;
> >>> +  uint32 ofs = 0;
> >>>    uint32 mask = 1 << (num & 31);
> >>>
> >>> +  if(num > 95)
> >>> +  {
> >>> +      ofs = 64; /* it's always + 0x100 */
> >>> +  }
> >>> +  else
> >>> +  {
> >>> +      ofs = num >> 5;
> >>> +  }
> >>> +     if (out)
> >>>      gpdr [ofs] |= mask;
> >>>    else
> >>> @@ -32,17 +41,27 @@ void gpioSetDir (int num, bool out)
> >>>
> >>>  bool gpioGetDir (int num)
> >>>  {
> >>> -  if (num > 84)
> >>> +  if (num > 118)
> >>>      return false;
> >>>
> >>>    uint32 *gpdr = (uint32 *)memPhysMap (GPDR);
> >>> +  uint32 ofs = 0;
> >>>
> >>> -  return (gpdr [num >> 5] & (1 << (num & 31))) != 0;
> >>> +  if(num > 95)
> >>> +  {
> >>> +      ofs = 64; /* it's always + 0x100 */
> >>> +  }
> >>> +  else
> >>> +  {
> >>> +      ofs = num >> 5;
> >>> +  }
> >>> +  +  return (gpdr [ofs] & (1 << (num & 31))) != 0;
> >>>  }
> >>>
> >>>  void gpioSetAlt (int num, int altfn)
> >>>  {
> >>> -  if (num > 84)
> >>> +  if (num > 118)
> >>>      return;
> >>>
> >>>    uint32 *gafr = (uint32 *)memPhysMap (GAFR);
> >>> @@ -54,7 +73,7 @@ void gpioSetAlt (int num, int altfn)
> >>>
> >>>  uint32 gpioGetAlt (int num)
> >>>  {
> >>> -  if (num > 84)
> >>> +  if (num > 118)
> >>>      return -1;
> >>>
> >>>    uint32 *gafr = (uint32 *)memPhysMap (GAFR);
> >>> @@ -64,25 +83,47 @@ uint32 gpioGetAlt (int num)
> >>>
> >>>  int gpioGetState (int num)
> >>>  {
> >>> -  if (num > 84)
> >>> +  if (num > 118)
> >>>      return -1;
> >>>
> >>> +  uint32 ofs = 0;
> >>> +
> >>> +  if(num > 95)
> >>> +  {
> >>> +      ofs = 64; /* it's always + 0x100 */
> >>> +  }
> >>> +  else
> >>> +  {
> >>> +      ofs = num >> 5;
> >>> +  }
> >>> +
> >>>    uint32 *gplr = (uint32 *)memPhysMap (GPLR);
> >>> -  return (gplr [num >> 5] >> (num & 31)) & 1;
> >>> +  return (gplr [ofs] >> (num & 31)) & 1;
> >>>  }
> >>>
> >>>  void gpioSetState (int num, bool state)
> >>>  {
> >>> -  if (num > 84)
> >>> +  if (num > 118)
> >>>      return;
> >>>
> >>> +  uint32 ofs = 0;
> >>> +
> >>> +  if(num > 95)
> >>> +  {
> >>> +      ofs = 64; /* it's always + 0x100 */
> >>> +  }
> >>> +  else
> >>> +  {
> >>> +      ofs = num >> 5;
> >>> +  }
> >>> +
> >>>    uint32 *gpscr = (uint32 *)memPhysMap (state ? GPSR : GPCR);
> >>> -  gpscr [num >> 5] |= 1 << (num & 31);
> >>> +  gpscr [ofs] |= 1 << (num & 31);
> >>>  }
> >>>
> >>>  int gpioGetSleepState (int num)
> >>>  {
> >>> -  if (num > 84)
> >>> +  if (num > 118)
> >>>      return -1;
> >>>
> >>>    uint32 *pgsr = (uint32 *)memPhysMap (PGSR);
> >>> @@ -91,7 +132,7 @@ int gpioGetSleepState (int num)
> >>>
> >>>  void gpioSetSleepState (int num, bool state)
> >>>  {
> >>> -  if (num > 84)
> >>> +  if (num > 118)
> >>>      return;
> >>>
> >>>    uint32 *pgsr = (uint32 *)memPhysMap (PGSR);
> >>> @@ -117,32 +158,50 @@ void gpioWatch (uint seconds)
> >>>    int i, j;
> >>>
> >>>    uint32 *gplr = (uint32 *)memPhysMap (GPLR);
> >>> -  uint32 old_gplr [3];
> >>> -  for (i = 0; i < 3; i++)
> >>> -    old_gplr [i] = gplr [i];
> >>> -
> >>> +  uint32 old_gplr [4];
> >>> +  for (i = 0; i < 4; i++)
> >>> +  {
> >>> +    if(i == 3)
> >>> +    {
> >>> +        old_gplr[i] = gplr[64];
> >>> +    }
> >>> +    else
> >>> +    {
> >>> +        old_gplr [i] = gplr [i];
> >>> +    }
> >>> +  }
> >>> +     uint32 *gpdr = (uint32 *)memPhysMap (GPDR);
> >>> -  uint32 old_gpdr [3];
> >>> -  for (i = 0; i < 3; i++)
> >>> -    old_gpdr [i] = gpdr [i];
> >>> -
> >>> +  uint32 old_gpdr [4];
> >>> +  for (i = 0; i < 4; i++)
> >>> +  {
> >>> +    if(i == 3)
> >>> +    {
> >>> +        old_gpdr[i] = gpdr[64];
> >>> +    }
> >>> +    else
> >>> +    {
> >>> +        old_gpdr [i] = gpdr [i];
> >>> +    }
> >>> +  }
> >>> +     uint32 *gafr = (uint32 *)memPhysMap (GAFR);
> >>> -  uint32 old_gafr [6];
> >>> -  for (i = 0; i < 6; i++)
> >>> +  uint32 old_gafr [8];
> >>> +  for (i = 0; i < 8; i++)
> >>>      old_gafr [i] = gafr [i];
> >>>
> >>>    while (cur_time <= fin_time)
> >>>    {
> >>>      gplr = (uint32 *)memPhysMap (GPLR);
> >>> -    for (i = 0; i < 3; i++)
> >>> +    for (i = 0; i < 4; i++)
> >>>      {
> >>> -      uint32 val = gplr [i];
> >>> +      uint32 val = i == 3 ? gplr[64] : gplr [i];
> >>>        if (old_gplr [i] != val)
> >>>        {
> >>>          uint32 changes = (old_gplr [i] ^ val) & ~gpioIgnore [i];
> >>>          for (j = 0; j < 32; j++)
> >>>            if ((changes & (1 << j))
> >>> -       && ((i * 32 + j) <= 84))
> >>> +       && ((i * 32 + j) <= 118))
> >>>        {
> >>>              Output (L"GPLR[%d] changed to %d", i * 32 + j, (val >>
> >>> j) & 1);
> >>>              Log (L"GPLR[%d] changed to %d", i * 32 + j, (val >> j) &
> >>> 1);
> >>> @@ -152,15 +211,15 @@ void gpioWatch (uint seconds)
> >>>      }
> >>>
> >>>      gpdr = (uint32 *)memPhysMap (GPDR);
> >>> -    for (i = 0; i < 3; i++)
> >>> +    for (i = 0; i < 4; i++)
> >>>      {
> >>> -      uint32 val = gpdr [i];
> >>> +      uint32 val = i == 3 ? gpdr[64] : gpdr [i];
> >>>        if (old_gpdr [i] != val)
> >>>        {
> >>>          uint32 changes = (old_gpdr [i] ^ val) & ~gpioIgnore [i];
> >>>          for (j = 0; j < 32; j++)
> >>>            if ((changes & (1 << j))
> >>> -       && ((i * 32 + j) <= 84))
> >>> +       && ((i * 32 + j) <= 118))
> >>>        {
> >>>              Output (L"GPDR[%d] changed to %d", i * 32 + j, (val >>
> >>> j) & 1);
> >>>              Log (L"GPDR[%d] changed to %d", i * 32 + j, (val >> j) &
> >>> 1);
> >>> @@ -170,7 +229,7 @@ void gpioWatch (uint seconds)
> >>>      }
> >>>
> >>>      gafr = (uint32 *)memPhysMap (GAFR);
> >>> -    for (i = 0; i < 6; i++)
> >>> +    for (i = 0; i < 8; i++)
> >>>      {
> >>>        uint32 val = gafr [i];
> >>>        if (old_gafr [i] != val)
> >>> @@ -178,7 +237,7 @@ void gpioWatch (uint seconds)
> >>>          uint32 changes = old_gafr [i] ^ val;
> >>>          for (j = 0; j < 16; j++)
> >>>            if (changes & (3 << j * 2)
> >>> -       && ((i * 32 + j) <= 83))
> >>> +       && ((i * 32 + j) <= 118))
> >>>        {
> >>>              Output (L"GAFR[%d] changed to %d", i * 16 + j, (changes
> >>> >> j * 2) & 3);
> >>>              Log (L"GAFR[%d] changed to %d", i * 16 + j, (changes >>
> >>> j * 2) & 3);
> >>> @@ -193,9 +252,9 @@ void gpioWatch (uint seconds)
> >>>
> >>>  uint32 gpioScrGPLR (bool setval, uint32 *args, uint32 val)
> >>>  {
> >>> -  if (args [0] > 84)
> >>> +  if (args [0] > 118)
> >>>    {
> >>> -    Output (L"Valid GPIO indexes are 0..84, not %d", args [0]);
> >>> +    Output (L"Valid GPIO indexes are 0..118, not %d", args [0]);
> >>>      return -1;
> >>>    }
> >>>
> >>> @@ -210,9 +269,9 @@ uint32 gpioScrGPLR (bool setval, uint32   uint32
> >>> gpioScrGPDR (bool setval, uint32 *args, uint32 val)
> >>>  {
> >>> -  if (args [0] > 84)
> >>> +  if (args [0] > 118)
> >>>    {
> >>> -    Output (L"Valid GPIO indexes are 0..84, not %d", args [0]);
> >>> +    Output (L"Valid GPIO indexes are 0..118, not %d", args [0]);
> >>>      return -1;
> >>>    }
> >>>
> >>> @@ -227,9 +286,9 @@ uint32 gpioScrGPDR (bool setval, uint32   uint32
> >>> gpioScrGAFR (bool setval, uint32 *args, uint32 val)
> >>>  {
> >>> -  if (args [0] > 84)
> >>> +  if (args [0] > 118)
> >>>    {
> >>> -    Output (L"Valid GPIO indexes are 0..84, not %d", args [0]);
> >>> +    Output (L"Valid GPIO indexes are 0..118, not %d", args [0]);
> >>>      return -1;
> >>>    }
> >>>
> >>> @@ -245,7 +304,7 @@ uint32 gpioScrGAFR (bool setval, uint32  bool
> >>> gpioDump (void (*out) (void *data, const char *, ...),
> >>>                 void *data, uint32 *args)
> >>>  {
> >>> -  const uint rows = 84/4;
> >>> +  const uint rows = 30;
> >>>    uint32 *grer = (uint32 *)memPhysMap (GRER);
> >>>    uint32 *gfer = (uint32 *)memPhysMap (GFER);
> >>>
> >>> @@ -256,8 +315,27 @@ bool gpioDump (void (*out) (void *data,      for
> >>> (uint j = 0; j < 4; j++)
> >>>      {
> >>>        uint gpio = i + j * rows;
> >>> -      bool re = (grer [gpio >> 5] & (1 << (gpio & 31))) != 0;
> >>> -      bool fe = (gfer [gpio >> 5] & (1 << (gpio & 31))) != 0;
> >>> +      uint32 ofs = 0;
> >>> +      bool re = false;
> >>> +      bool fe = false;
> >>> +
> >>> +      if(gpio > 118)
> >>> +      {
> >>> +          out (data, "                 %s", j < 3 ? " | " : "\n");
> >>> +          continue;
> >>> +      }
> >>> +      +      if(gpio > 95)
> >>> +      {
> >>> +          ofs = 64;
> >>> +      }
> >>> +      else
> >>> +      {
> >>> +          ofs = gpio >> 5;
> >>> +      }
> >>> +      +      re = (grer [ofs] & (1 << (gpio & 31))) != 0;
> >>> +      fe = (gfer [ofs] & (1 << (gpio & 31))) != 0;
> >>>
> >>>        out (data, "%3d   %c %d %d %s%s%s", gpio, gpioGetDir (gpio) ?
> >>> 'O' : 'I',
> >>>             gpioGetState (gpio), gpioGetAlt (gpio),
> >>> @@ -273,19 +351,19 @@ bool gpioDumpState (void (*out) (void *d
> >>>  {
> >>>    int i;
> >>>    out (data, "/* GPIO pin direction setup */\n");
> >>> -  for (i = 0; i < 81; i++)
> >>> +  for (i = 0; i < 118; i++)
> >>>      out (data, "#define GPIO%02d_Dir\t%d\n",
> >>>           i, gpioGetDir (i));
> >>>    out (data, "\n/* GPIO Alternate Function (Select Function 0 ~ 3)
> >>> */\n");
> >>> -  for (i = 0; i < 81; i++)
> >>> +  for (i = 0; i < 118; i++)
> >>>      out (data, "#define GPIO%02d_AltFunc\t%d\n",
> >>>           i, gpioGetAlt (i));
> >>>    out (data, "\n/* GPIO Pin Init State */\n");
> >>> -  for (i = 0; i < 81; i++)
> >>> +  for (i = 0; i < 118; i++)
> >>>      out (data, "#define GPIO%02d_Level\t%d\n",
> >>>           i, gpioGetDir (i) ? gpioGetState (i) : 0);
> >>>    out (data, "\n/* GPIO Pin Sleep Level */\n");
> >>> -  for (i = 0; i < 81; i++)
> >>> +  for (i = 0; i < 118; i++)
> >>>      out (data, "#define GPIO%02d_Sleep_Level\t%d\n",
> >>>           i, gpioGetSleepState (i));
> >>>    return true;
> >>> diff -Nupr haret/src/script.cpp haret-new/src/script.cpp
> >>> --- haret/src/script.cpp    2005-04-21 23:06:14.000000000 +0200
> >>> +++ haret-new/src/script.cpp    2006-01-13 10:44:16.000000000 +0100
> >>> @@ -46,7 +46,7 @@ static varDescriptor ScriptVars [] =
> >>>    { "CMDLINE", "Kernel command line",
> >>>      varString, (uint32 *)&bootCmdline },
> >>>    { "IGPIO", "The list of GPIOs to ignore during WGPIO",
> >>> -    varBitSet, (uint32 *)&gpioIgnore, 84 },
> >>> +    varBitSet, (uint32 *)&gpioIgnore, 118 },
> >>>    { "BOOTSPD", "Boot animation speed, usec/scanline (0-no delay)",
> >>>      varInteger, &bootSpeed },
> >>>    { "MTYPE", "ARM machine type (see linux/arch/arm/tools/mach-types)",
> >>>
> --
> _______________________________________________
> Aximx50-port mailing list
> [email protected]
> https://www.handhelds.org/mailman/listinfo/aximx50-port
>
--
_______________________________________________
Aximx50-port mailing list
[email protected]
https://www.handhelds.org/mailman/listinfo/aximx50-port

Reply via email to