Richard did make some modifications to haret about PXA270 family, but I forgot the details. I am uploading the source of haret, you can download it here after about 1 hour.

aximx50.nerdvana.net.au/beta1/haret_5_25_with_uart_working.tar.gz

Sorry for the delay, I am preparing an English test these days.

Fisherss

Chris Morgan wrote:
Who handles haret patches?  I've emailed the author on a couple
occasions with fixes to bugs and an improvement to the build scripts
but I've had no reply.

Chris


On 1/13/06, Michael Cutler <[EMAIL PROTECTED]> wrote:
LOL

http://www.intel.com/design/pca/applicationsprocessors/manuals/280000.htm
&
http://www.intel.com/design/pca/applicationsprocessors/faq/pxa27x_faq.htm

I was suprised it has it's own USB 1.1 OHCI Host Controller on board ;)


Michael


Angel Sánchez Morales wrote:
Hey, give us the link, NOW! :p
I think it'll be perfect for when i have to look at usb networking :)

I remember we had another manual, the one of 2700G iirc...
Well, could you point at where is it? :)


Michael Cutler wrote:

I've just discovered the "Intel(r) PXA27x Processor Family Developer's
Manual" and its like Christmas! lots of promising information in it.
If only I knew what to do with it :D

;)

Michael


Bernd Froemel wrote:

Attached you find a small patch to support 119 instead of 84 gpios.
Apply only to pxa270.

Bernd


------------------------------------------------------------------------

diff -Nupr haret/src/gpio.cpp haret-new/src/gpio.cpp
--- haret/src/gpio.cpp    2004-01-10 18:37:18.000000000 +0100
+++ haret-new/src/gpio.cpp    2006-01-13 10:43:52.000000000 +0100
@@ -13,17 +13,26 @@
 #include "output.h"

 // Which GPIO changes to ignore during watch
-uint32 gpioIgnore [3] = { 0, 0, 0 };
+uint32 gpioIgnore [4] = { 0, 0, 0, 0 };

 void gpioSetDir (int num, bool out)
 {
-  if (num > 84)
+  if (num > 118)
     return;

   uint32 *gpdr = (uint32 *)memPhysMap (GPDR);
-  uint32 ofs = num >> 5;
+  uint32 ofs = 0;
   uint32 mask = 1 << (num & 31);

+  if(num > 95)
+  {
+      ofs = 64; /* it's always + 0x100 */
+  }
+  else
+  {
+      ofs = num >> 5;
+  }
+     if (out)
     gpdr [ofs] |= mask;
   else
@@ -32,17 +41,27 @@ void gpioSetDir (int num, bool out)

 bool gpioGetDir (int num)
 {
-  if (num > 84)
+  if (num > 118)
     return false;

   uint32 *gpdr = (uint32 *)memPhysMap (GPDR);
+  uint32 ofs = 0;

-  return (gpdr [num >> 5] & (1 << (num & 31))) != 0;
+  if(num > 95)
+  {
+      ofs = 64; /* it's always + 0x100 */
+  }
+  else
+  {
+      ofs = num >> 5;
+  }
+  +  return (gpdr [ofs] & (1 << (num & 31))) != 0;
 }

 void gpioSetAlt (int num, int altfn)
 {
-  if (num > 84)
+  if (num > 118)
     return;

   uint32 *gafr = (uint32 *)memPhysMap (GAFR);
@@ -54,7 +73,7 @@ void gpioSetAlt (int num, int altfn)

 uint32 gpioGetAlt (int num)
 {
-  if (num > 84)
+  if (num > 118)
     return -1;

   uint32 *gafr = (uint32 *)memPhysMap (GAFR);
@@ -64,25 +83,47 @@ uint32 gpioGetAlt (int num)

 int gpioGetState (int num)
 {
-  if (num > 84)
+  if (num > 118)
     return -1;

+  uint32 ofs = 0;
+
+  if(num > 95)
+  {
+      ofs = 64; /* it's always + 0x100 */
+  }
+  else
+  {
+      ofs = num >> 5;
+  }
+
   uint32 *gplr = (uint32 *)memPhysMap (GPLR);
-  return (gplr [num >> 5] >> (num & 31)) & 1;
+  return (gplr [ofs] >> (num & 31)) & 1;
 }

 void gpioSetState (int num, bool state)
 {
-  if (num > 84)
+  if (num > 118)
     return;

+  uint32 ofs = 0;
+
+  if(num > 95)
+  {
+      ofs = 64; /* it's always + 0x100 */
+  }
+  else
+  {
+      ofs = num >> 5;
+  }
+
   uint32 *gpscr = (uint32 *)memPhysMap (state ? GPSR : GPCR);
-  gpscr [num >> 5] |= 1 << (num & 31);
+  gpscr [ofs] |= 1 << (num & 31);
 }

 int gpioGetSleepState (int num)
 {
-  if (num > 84)
+  if (num > 118)
     return -1;

   uint32 *pgsr = (uint32 *)memPhysMap (PGSR);
@@ -91,7 +132,7 @@ int gpioGetSleepState (int num)

 void gpioSetSleepState (int num, bool state)
 {
-  if (num > 84)
+  if (num > 118)
     return;

   uint32 *pgsr = (uint32 *)memPhysMap (PGSR);
@@ -117,32 +158,50 @@ void gpioWatch (uint seconds)
   int i, j;

   uint32 *gplr = (uint32 *)memPhysMap (GPLR);
-  uint32 old_gplr [3];
-  for (i = 0; i < 3; i++)
-    old_gplr [i] = gplr [i];
-
+  uint32 old_gplr [4];
+  for (i = 0; i < 4; i++)
+  {
+    if(i == 3)
+    {
+        old_gplr[i] = gplr[64];
+    }
+    else
+    {
+        old_gplr [i] = gplr [i];
+    }
+  }
+     uint32 *gpdr = (uint32 *)memPhysMap (GPDR);
-  uint32 old_gpdr [3];
-  for (i = 0; i < 3; i++)
-    old_gpdr [i] = gpdr [i];
-
+  uint32 old_gpdr [4];
+  for (i = 0; i < 4; i++)
+  {
+    if(i == 3)
+    {
+        old_gpdr[i] = gpdr[64];
+    }
+    else
+    {
+        old_gpdr [i] = gpdr [i];
+    }
+  }
+     uint32 *gafr = (uint32 *)memPhysMap (GAFR);
-  uint32 old_gafr [6];
-  for (i = 0; i < 6; i++)
+  uint32 old_gafr [8];
+  for (i = 0; i < 8; i++)
     old_gafr [i] = gafr [i];

   while (cur_time <= fin_time)
   {
     gplr = (uint32 *)memPhysMap (GPLR);
-    for (i = 0; i < 3; i++)
+    for (i = 0; i < 4; i++)
     {
-      uint32 val = gplr [i];
+      uint32 val = i == 3 ? gplr[64] : gplr [i];
       if (old_gplr [i] != val)
       {
         uint32 changes = (old_gplr [i] ^ val) & ~gpioIgnore [i];
         for (j = 0; j < 32; j++)
           if ((changes & (1 << j))
-       && ((i * 32 + j) <= 84))
+       && ((i * 32 + j) <= 118))
       {
             Output (L"GPLR[%d] changed to %d", i * 32 + j, (val >>
j) & 1);
             Log (L"GPLR[%d] changed to %d", i * 32 + j, (val >> j) &
1);
@@ -152,15 +211,15 @@ void gpioWatch (uint seconds)
     }

     gpdr = (uint32 *)memPhysMap (GPDR);
-    for (i = 0; i < 3; i++)
+    for (i = 0; i < 4; i++)
     {
-      uint32 val = gpdr [i];
+      uint32 val = i == 3 ? gpdr[64] : gpdr [i];
       if (old_gpdr [i] != val)
       {
         uint32 changes = (old_gpdr [i] ^ val) & ~gpioIgnore [i];
         for (j = 0; j < 32; j++)
           if ((changes & (1 << j))
-       && ((i * 32 + j) <= 84))
+       && ((i * 32 + j) <= 118))
       {
             Output (L"GPDR[%d] changed to %d", i * 32 + j, (val >>
j) & 1);
             Log (L"GPDR[%d] changed to %d", i * 32 + j, (val >> j) &
1);
@@ -170,7 +229,7 @@ void gpioWatch (uint seconds)
     }

     gafr = (uint32 *)memPhysMap (GAFR);
-    for (i = 0; i < 6; i++)
+    for (i = 0; i < 8; i++)
     {
       uint32 val = gafr [i];
       if (old_gafr [i] != val)
@@ -178,7 +237,7 @@ void gpioWatch (uint seconds)
         uint32 changes = old_gafr [i] ^ val;
         for (j = 0; j < 16; j++)
           if (changes & (3 << j * 2)
-       && ((i * 32 + j) <= 83))
+       && ((i * 32 + j) <= 118))
       {
             Output (L"GAFR[%d] changed to %d", i * 16 + j, (changes
j * 2) & 3);
             Log (L"GAFR[%d] changed to %d", i * 16 + j, (changes >>
j * 2) & 3);
@@ -193,9 +252,9 @@ void gpioWatch (uint seconds)

 uint32 gpioScrGPLR (bool setval, uint32 *args, uint32 val)
 {
-  if (args [0] > 84)
+  if (args [0] > 118)
   {
-    Output (L"Valid GPIO indexes are 0..84, not %d", args [0]);
+    Output (L"Valid GPIO indexes are 0..118, not %d", args [0]);
     return -1;
   }

@@ -210,9 +269,9 @@ uint32 gpioScrGPLR (bool setval, uint32   uint32
gpioScrGPDR (bool setval, uint32 *args, uint32 val)
 {
-  if (args [0] > 84)
+  if (args [0] > 118)
   {
-    Output (L"Valid GPIO indexes are 0..84, not %d", args [0]);
+    Output (L"Valid GPIO indexes are 0..118, not %d", args [0]);
     return -1;
   }

@@ -227,9 +286,9 @@ uint32 gpioScrGPDR (bool setval, uint32   uint32
gpioScrGAFR (bool setval, uint32 *args, uint32 val)
 {
-  if (args [0] > 84)
+  if (args [0] > 118)
   {
-    Output (L"Valid GPIO indexes are 0..84, not %d", args [0]);
+    Output (L"Valid GPIO indexes are 0..118, not %d", args [0]);
     return -1;
   }

@@ -245,7 +304,7 @@ uint32 gpioScrGAFR (bool setval, uint32  bool
gpioDump (void (*out) (void *data, const char *, ...),
                void *data, uint32 *args)
 {
-  const uint rows = 84/4;
+  const uint rows = 30;
   uint32 *grer = (uint32 *)memPhysMap (GRER);
   uint32 *gfer = (uint32 *)memPhysMap (GFER);

@@ -256,8 +315,27 @@ bool gpioDump (void (*out) (void *data,      for
(uint j = 0; j < 4; j++)
     {
       uint gpio = i + j * rows;
-      bool re = (grer [gpio >> 5] & (1 << (gpio & 31))) != 0;
-      bool fe = (gfer [gpio >> 5] & (1 << (gpio & 31))) != 0;
+      uint32 ofs = 0;
+      bool re = false;
+      bool fe = false;
+
+      if(gpio > 118)
+      {
+          out (data, "                 %s", j < 3 ? " | " : "\n");
+          continue;
+      }
+      +      if(gpio > 95)
+      {
+          ofs = 64;
+      }
+      else
+      {
+          ofs = gpio >> 5;
+      }
+      +      re = (grer [ofs] & (1 << (gpio & 31))) != 0;
+      fe = (gfer [ofs] & (1 << (gpio & 31))) != 0;

       out (data, "%3d   %c %d %d %s%s%s", gpio, gpioGetDir (gpio) ?
'O' : 'I',
            gpioGetState (gpio), gpioGetAlt (gpio),
@@ -273,19 +351,19 @@ bool gpioDumpState (void (*out) (void *d
 {
   int i;
   out (data, "/* GPIO pin direction setup */\n");
-  for (i = 0; i < 81; i++)
+  for (i = 0; i < 118; i++)
     out (data, "#define GPIO%02d_Dir\t%d\n",
          i, gpioGetDir (i));
   out (data, "\n/* GPIO Alternate Function (Select Function 0 ~ 3)
*/\n");
-  for (i = 0; i < 81; i++)
+  for (i = 0; i < 118; i++)
     out (data, "#define GPIO%02d_AltFunc\t%d\n",
          i, gpioGetAlt (i));
   out (data, "\n/* GPIO Pin Init State */\n");
-  for (i = 0; i < 81; i++)
+  for (i = 0; i < 118; i++)
     out (data, "#define GPIO%02d_Level\t%d\n",
          i, gpioGetDir (i) ? gpioGetState (i) : 0);
   out (data, "\n/* GPIO Pin Sleep Level */\n");
-  for (i = 0; i < 81; i++)
+  for (i = 0; i < 118; i++)
     out (data, "#define GPIO%02d_Sleep_Level\t%d\n",
          i, gpioGetSleepState (i));
   return true;
diff -Nupr haret/src/script.cpp haret-new/src/script.cpp
--- haret/src/script.cpp    2005-04-21 23:06:14.000000000 +0200
+++ haret-new/src/script.cpp    2006-01-13 10:44:16.000000000 +0100
@@ -46,7 +46,7 @@ static varDescriptor ScriptVars [] =
   { "CMDLINE", "Kernel command line",
     varString, (uint32 *)&bootCmdline },
   { "IGPIO", "The list of GPIOs to ignore during WGPIO",
-    varBitSet, (uint32 *)&gpioIgnore, 84 },
+    varBitSet, (uint32 *)&gpioIgnore, 118 },
   { "BOOTSPD", "Boot animation speed, usec/scanline (0-no delay)",
     varInteger, &bootSpeed },
   { "MTYPE", "ARM machine type (see linux/arch/arm/tools/mach-types)",

--
_______________________________________________
Aximx50-port mailing list
[email protected]
https://www.handhelds.org/mailman/listinfo/aximx50-port

--
_______________________________________________
Aximx50-port mailing list
[email protected]
https://www.handhelds.org/mailman/listinfo/aximx50-port

Reply via email to