Hi Michael, Thanks for the reply, I am ordering a few of the connectors when they come back in stock.
Interesting about the touchscreen chip, I'll have to have a dig through the data sheet and compare it to what is there. Phil On Tue, 2006-04-11 at 14:09 +0100, Michael Cutler wrote: > Hi Philip, > > I searched long and hard for fully-connected cable and had no luck, in > the end I bought the connector assembly from www.gomadic.com and built > the cable myself. The connector assembly has unbelievably small posts to > solder to, it was quite a chore to do it neatly; www.gomadic.com also > have a version of the connector with the 5 serial wires pre-soldered for > you. > > I think you'll find the USB cable just has the minimum wiring for the > USB functionality. > > The make and model of the Touchscreen chip is listed on the website as a > Texas Instruments ADS 7846N. I have personal experience in trying to get > information out of TI and its not easy, basically if you cant find it on > their website you'll have a tough time getting it from them directly - > "we don't directly support end-users" etc. > > http://handhelds.org/moin/moin.cgi/DellAximX50Hardware > > This appears to be the only in-depth document about the chip listed on > their website: http://focus.ti.com/lit/ds/symlink/ads7846.pdf > > -- > Michael Cutler . o O ( http://blog.lobstertechnology.com/ ) > PGP: 0xC3ABA735 > > > Philip Trickett (List) wrote: > > Hi, > > > > Just got an X50v, and I have been following the list for a few months > > now. > > > > I have a couple of questions: > > > > Does anyone know where I can get a cable with all the conductors > > connected? Does the USB one that comes with the Axim have all the > > connections within the cable? > > > > For the touchscreen, does anyone have the make and model number of the > > touchscreen chip? I was going to go on a trawl for documentation with > > regard to the position reporting. > > > > Cheers, > > Phil > > > > P.S. Is it possible to use the USB serial console (ttyUSB0) during boot? > > I remember being able to do that when I had an iPaq 3630. > > > > -- _______________________________________________ Aximx50-port mailing list [email protected] https://www.handhelds.org/mailman/listinfo/aximx50-port
