Oh, thanks heh.
I recompiled my kernel with the new support of usbnet and tried to log in.
When i put the password it says:
[EMAIL PROTECTED]'s password:
/etc/profile.d/tslib.sh: 3: detect-stylus: not found
Perhaps it's because the touchscreen driver is not loaded.
I tried to modprobe tsdev and the touchscreen still doesn't accept any
input.
A funny thing i found is that when you look at mounted partitions there's:
/dev/mmc/blk0/part1 on /mnt/sdcard type vfat
(rw,fmask=0022,dmask=0022,codepage=cp437,iocharset=iso8859-1)
but then when you ls /mnt it says this:
[EMAIL PROTECTED]:/mnt# ls /mnt
card cf net ram
there's no sdcard :/
Also i noticed that root is mounted twice:
[EMAIL PROTECTED]:/mnt# mount
/dev/loop0 on / type ext2 (rw,nogrpid) <= here!
/dev/mmc/blk0/part1 on /mnt/sdcard type vfat
(rw,fmask=0022,dmask=0022,codepage=cp437,iocharset=iso8859-1)
/dev/loop0 on / type ext2 (rw,nogrpid) <= and here!!!
proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
/dev/loop0 on /dev/.static/dev type ext2 (rw,nogrpid)
tmpfs on /dev type tmpfs (rw)
tmpfs on /var type tmpfs (rw)
tmpfs on /media/ram type tmpfs (rw)
devpts on /dev/pts type devpts (rw)
Then if i "mount /dev/mmcblk0p1 /mnt/sdcard/" i can see my sd card
mounted :)
Great job JeDi! ;)
JeDi wrote:
On 4/15/06, Angel Sánchez Morales <[EMAIL PROTECTED]> wrote:
Hi!
I've loaded linux with the new usb-networking kernel and so, and it
stops at the welcome to opie screen and when i tap the screen doesn't
happen. Then i disconnect the pda, and connect it again and look at
dmesg output and i can see there's a new usb device. But after that i
don't know how to put the networking up, what's that usbnet thing?
usbnet is a kernel module that allows you to setup a network
connection to a linux pda.
Here is some more information: http://www.handhelds.org/moin/moin.cgi/UsbNet
Greetz,
JeDi
--
_______________________________________________
Aximx50-port mailing list
[email protected]
https://www.handhelds.org/mailman/listinfo/aximx50-port