No, i used the files you posted 2 days ago :p
I'll try tomorrow the new files, i'll keep you informed :)


JeDi wrote:
On 4/15/06, Angel Sánchez Morales <[EMAIL PROTECTED]> wrote:

I recompiled my kernel with the new support of usbnet and tried to log in.

When i put the password it says:

[EMAIL PROTECTED]'s password:
/etc/profile.d/tslib.sh: 3: detect-stylus: not found

Perhaps it's because the touchscreen driver is not loaded.


No, I found that detect-stylus is a package that can be installed in
familiar linux (the one we're using). I don't have experience with
installing packages, but normally, when you configure nat to connect
to the internet through the usb connection, you can install the
package. My guess is that it'll detect which touchscreen drivers to
use, so it may help us...



I tried to modprobe tsdev and the touchscreen still doesn't accept any
input.


Maybe we should try to compile Fisherss' touchscreen driver, but there
seems to be a lot of changes in the touchscreen part of the kernel.
Maybe we can find a driver that just works now, like with the usb
networking?



A funny thing i found is that when you look at mounted partitions there's:
/dev/mmc/blk0/part1 on /mnt/sdcard type vfat
(rw,fmask=0022,dmask=0022,codepage=cp437,iocharset=iso8859-1)

but then when you ls /mnt it says this:
[EMAIL PROTECTED]:/mnt# ls /mnt
card  cf    net   ram

there's no sdcard :/

Also i noticed that root is mounted twice:

[EMAIL PROTECTED]:/mnt# mount
/dev/loop0 on / type ext2 (rw,nogrpid)  <= here!
/dev/mmc/blk0/part1 on /mnt/sdcard type vfat
(rw,fmask=0022,dmask=0022,codepage=cp437,iocharset=iso8859-1)
/dev/loop0 on / type ext2 (rw,nogrpid)  <= and here!!!
proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
/dev/loop0 on /dev/.static/dev type ext2 (rw,nogrpid)
tmpfs on /dev type tmpfs (rw)
tmpfs on /var type tmpfs (rw)
tmpfs on /media/ram type tmpfs (rw)
devpts on /dev/pts type devpts (rw)


Yeah, that's probably because we use the initrd first, and then change
the rootfs to the sd card. I don't have much experience with that, but
we can clean that up when everything is working ;-)

BTW, did you use the new package I uploaded today? Not much has
changed, but it hasn't been tested yet.

Greetz,
JeDi
--
_______________________________________________
Aximx50-port mailing list
[email protected]
https://www.handhelds.org/mailman/listinfo/aximx50-port

Reply via email to