Hi all, champagne !!! I got something booting 8-)
Here is the log : Linux version 2.6.19-hh7 ([EMAIL PROTECTED]) (gcc version 4.1.2 20061028 (prereleas e) (Debian 4.1.1-19)) #1 Wed Jan 17 23:44:15 CET 2007 CPU: XScale-PXA270 [69054117] revision 7 (ARMv5TE), cr=0000397f Machine: Dell Axim X30 Memory policy: ECC disabled, Data cache writeback Run Mode clock: 208.00MHz (*16) Turbo Mode clock: 624.00MHz (*3.0, active) Memory clock: 208.00MHz (/2) System bus clock: 208.00MHz CPU0: D VIVT undefined 5 cache CPU0: I cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets CPU0: D cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets Built 1 zonelists. Total pages: 16256 Kernel command line: root=/dev/ram0 rw mem=64M ramdisk_size=12288 keepinitrd ini t=/linuxrc console=ttyS0,115200n8 PID hash table entries: 256 (order: 8, 1024 bytes) start_kernel(): bug: interrupts were enabled early Console: colour dummy device 80x30 Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) Memory: 64MB = 64MB total Memory: 62116KB available (1840K code, 823K data, 88K init) Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok asic3: using irq 160-229 on irq 44 and it stops there. The HaRet script used is attached, and the serial console is displayed thanks to the following commands : stty 115200 -cstopb cs8 < /dev/ttyS0 cat /dev/ttyS0 Pierre
set GAFR(34) 1 set GAFR(35) 1 set GAFR(37) 1 set GAFR(39) 2 set GAFR(40) 2 set GAFR(41) 2 set GPDR(34) 0 set GPDR(35) 0 set GPDR(37) 0 set GPLR(34) 1 set GPLR(35) 1 set GPLR(37) 1 set GPLR(39) 1 set kernel "zImage" set initrd "initrd.gz" set mtype "655" set kernelcrc 1 set COM 1 set RAMSIZE 67108864 set RAMADDR 0xa8000000 set cmdline "root=/dev/ram0 rw mem=64M ramdisk_size=12288 keepinitrd init=/linuxrc console=ttyS0,115200n8" boot
-- _______________________________________________ Aximx50-port mailing list [email protected] https://www.handhelds.org/mailman/listinfo/aximx50-port
