Well, I tested quite a few SSP configurations for TSC2046...

The current ads7846_adc_ssp.c does not work for Axim X50 family.
I had to modify ads7846_init_chip() to get something, in the following way :

    SSCR0_P(port) = 0;
    *pxa_set_cken(CKEN23_SSP1, 1);*
    SSCR0_P(port) |= SSCR0_DataSize(12); /* 12 bits */
    SSCR0_P(port) |= *SSCR0_Motorola*;
    SSCR0_P(port) |= 0x11 << 8; /* ~100 KHz */
    SSCR1_P(port) = 0;
    SSCR0_P(port) |= SSCR0_SSE;

Even with these modifications, all I get is x=2048, y=2048...
Communications on 24 bits as in my previous patch seems the only stable
configuration.
I do not understand why : there is no special constraint at this level
in the TSC 2046 datasheet...
Nervertheless, I then get linear measurements in the [5000,
30000]x[5000, 30000] range, that seem useable.


Pierre

-- 
_______________________________________________
Aximx50-port mailing list
[email protected]
https://www.handhelds.org/mailman/listinfo/aximx50-port

Reply via email to