Hi Patrick, Patrick Steiner a écrit : > On Wednesday, 14. February 2007 22:55:09 Pierre GAUFILLET wrote: >> Hi all, >> >> you'll find attached a patch with the following modifications : >> - add ADS7846/TSC2046 touchscreen support to Axim X50 (thanks for this >> nice job, Paul !) >> - small fixes in pxafb.c and aximx50_buttons.c (build warnings) >> - tabulation clean up in aximx50.c >> - use SSCR0_SerClkDiv in ads7846_adc_ssp.c >> - updated aximx50_defconfig >> >> It should apply on the current HEAD kernel. >> >> Of course, your remarks are welcome :-) >> >> Pierre > > with your patch the display doesnt work and usb_ether also doesnt work..
x51v display implies to load pxafb module at boot with this defconfig. The alternative is of course to compile it inside the kernel. Reagarding USB, I have no idea. In fact, I even did not test it. I will do some tests during this week end. > > usb0: register 'cdc_subset' at usb-0000:00:10.0-1.4, Linux Device, > a2:3f:a6:22:96:ee > NETDEV WATCHDOG: usb0: transmit timed out > usb0: no IPv6 routers present > NETDEV WATCHDOG: usb0: transmit timed out > > It reminds me a problem I had at the beginning : you have to remove/unload rndis driver on the host side before to connect your axim to it. > any ideas? > > Pierre -- _______________________________________________ Aximx50-port mailing list [email protected] https://www.handhelds.org/mailman/listinfo/aximx50-port
