On Saturday, 30. June 2007 15:49:36 Tom Z wrote: > Hi, > > I finally got hold of a x51v so I could start loading the linux to it. > With the latest package from Patrick, I booted my x51v with no problem, > and logged in via the usb0. > > Though my screen never progressed after the initial few lines from HaRET > (I believe), upto the line: > > "Jump to Kernel.." > > The font size is very small on the screen so I couldn't see very clearly. > I also tried the previous package from Patrick but the screen actually > doesn't refresh as the latest one does after the "Run" button tapped. Have you activated mirror mode of the screen?
where is your axim from (language) and what firmware-version is running on it? > > I saw posts here discussing about unable to calibrate so clearly > folks had progrssed further than I did so I must have missed > something, and likely could be a trivial one. Do I have to manually > start a GUI startup script? you can restart the gpe init script its in /etc/init.d/gpe-dm. but it will not work if you don't see anything on you screen. > > Any idea would be appreciated. I also built a kernel from top of > the source tree and will give that a try. I'd had kernel development > work done before so may be able to contribute some to this wonderful > project. it would be very nice if you could help use. patrick > > Thanks! > > Tom -- Patrick Steiner | [EMAIL PROTECTED] ICQ: 128261350 WWW: http://helmsdeep.homelinux.net/~pat working on (tux4u.skynet): Fedora release 7 (Moonshine) GNU/Linux 2.6.21-1.3228.fc7 -- _______________________________________________ Aximx50-port mailing list [email protected] https://www.handhelds.org/mailman/listinfo/aximx50-port
