On Saturday, 30. June 2007 20:45:06 Tom Z wrote: > The mirror mode was it. I forgot that any reset would have erased > the setting. Patrick, thanks for the help. ok, i should add this to the README file.
> > The unit was ordered within the US so it's english based. Here is > what given from the System Info. screen: > > PXA270, 624MHz, RAM 64MB, ROM 256MB, ROM Version A06(12190500) > w/ Wireless and BT you could take a look at the dell.com homepage for a newer ROM. But i don't know if newer ones works with linux. > > BTW, my unit's calibration worked smoothly and led me into the GPE. First > time user for the GPE though so didn't do much with it. > > Is there a TODO list for the remaining tasks? I believe I read someone > had taken on the WiFi driver. take a look at http://www.handhelds.org/moin/moin.cgi/DellAximX50 here you could see whats working. patrick > > Tom > > On 30/06/07 16:26 +0200, Patrick Steiner wrote: > > On Saturday, 30. June 2007 15:49:36 Tom Z wrote: > > > Hi, > > > > > > I finally got hold of a x51v so I could start loading the linux to it. > > > With the latest package from Patrick, I booted my x51v with no problem, > > > and logged in via the usb0. > > > > > > Though my screen never progressed after the initial few lines from > > > HaRET (I believe), upto the line: > > > > > > "Jump to Kernel.." > > > > > > The font size is very small on the screen so I couldn't see very > > > clearly. I also tried the previous package from Patrick but the screen > > > actually doesn't refresh as the latest one does after the "Run" button > > > tapped. > > > > Have you activated mirror mode of the screen? > > > > where is your axim from (language) and what firmware-version is running > > on it? > > > > > I saw posts here discussing about unable to calibrate so clearly > > > folks had progrssed further than I did so I must have missed > > > something, and likely could be a trivial one. Do I have to manually > > > start a GUI startup script? > > > > you can restart the gpe init script its in /etc/init.d/gpe-dm. but it > > will not work if you don't see anything on you screen. > > > > > Any idea would be appreciated. I also built a kernel from top of > > > the source tree and will give that a try. I'd had kernel development > > > work done before so may be able to contribute some to this wonderful > > > project. > > > > it would be very nice if you could help use. > > > > patrick > > > > > Thanks! > > > > > > Tom > > > > -- > > Patrick Steiner | [EMAIL PROTECTED] > > ICQ: 128261350 > > WWW: http://helmsdeep.homelinux.net/~pat > > > > working on (tux4u.skynet): > > Fedora release 7 (Moonshine) > > GNU/Linux 2.6.21-1.3228.fc7 > > -- > > _______________________________________________ > > Aximx50-port mailing list > > [email protected] > > https://www.handhelds.org/mailman/listinfo/aximx50-port -- _______________________________________________ Aximx50-port mailing list [email protected] https://www.handhelds.org/mailman/listinfo/aximx50-port
