ok, im getting tcpdumps, this is a test bed of the same hardward atheros based Ubiquity NS2 devices running OpenWRT trunk 1 gateway -> 70 meters -> 1 node no batgat, batmand running it goes into this constant loop as shown in
http://pastebin.com/md162302 which is from last night 10PM where the gateway and node continuously go into this ip expired loop for 5-15 minutes causing routing for clients to go away, and network unstability, then it appears to come back for a while I also have 21 nodes, same hardware, running batgat which still crashed as Gustavo pointed out of which the logs were forwarded, the test bed has been setup to remove batgat and look for stability im tcpdumping on both client and gateway now, ill forward the result of these logs in a bit as for wireshark ill make a build with that and see if i can get these logs also On Fri, Sep 12, 2008 at 9:31 AM, Marek Lindner <lindner_ma...@yahoo.de>wrote: > On Thursday, 11. September 2008 21:01:11 Outback Dingo wrote: > > Batmand never established a stable route for clients, ie. they never get > > reliable internet, actually to be honest, they get 0 internet cause > routing > > always loops > > Please be precise here: Do you see routing loops or is your UDP connection > not > stable (as indicated by your log) ? > > > > i also found this thread from before showing a similiar issue > > > > > https://list.open-mesh.net/pipermail/b.a.t.m.a.n/2007-September/000277.html > > This may or may not apply here. I have a look into the code later. Do you > use > different hardware for your gateways and clients or always the same ? > > > > question is how do i get the routes to stabilize so the mesh functions > > As I mentioned before we need a tcpdump of your traffic to help you. Even > better would be a wireshark log from both ends that we can analyze. > > Greetings, > Marek > > _______________________________________________ > B.A.T.M.A.N mailing list > b.a.t.m....@open-mesh.net > https://list.open-mesh.net/mm/listinfo/b.a.t.m.a.n >