I originally had my MTU values set incorrectly, but believe i have them correct now
router with internet ath0 - MTU 1524 (physical wifi device) bat0 - MTU 1500 br-lan - MTU 1500 (bridged with bat0/eth1) wifi0 - MTU 1500 (should this be 1524 also) router on otherside of mesh ath0 - MTU 1524 (physical wifi device) bat0 - MTU 1500 br-lan - MTU 1500 wifi0 - MTU 1500 (should this be 1524 also) I am aware that it is quite an old verison, although this is the version that is currently in the openwrt repo. I will compile a more recent version once i have the basics working i think. Thanks for you help so far guys, two people have suggested MTU issues now, so fingers crossed someone can see something wrong with the output above? On Thu, Aug 12, 2010 at 1:33 PM, Marek Lindner <[email protected]> wrote: > On Thursday 12 August 2010 12:16:29 David Beaumont wrote: >> nexthops .. . [B.A.T.M.A.N. Adv 0.1 rv1176, MainIF/MAC: > > FYI: You use a very old version of batman-adv ... > > >> Pings work fine, a wget just pauses and waits indefinitely > > That sounds like a MTU problem. What is the mtu of your wifi interfaces ? Here > is a document describing the issue: > http://www.open-mesh.org/wiki/batman-adv-quick-start-guide > > Cheers, > Marek >
