On Thursday 12 August 2010 12:41:41 David Beaumont wrote: > I originally had my MTU values set incorrectly, but believe i have > them correct now > > router with internet > > ath0 - MTU 1524 (physical wifi device) > > router on otherside of mesh > > ath0 - MTU 1524 (physical wifi device)
Yes, that looks good. The problems you describe sound like MTU or firewall issues which is why I was asking. > wifi0 - MTU 1500 (should this be 1524 also) You should ignore the wifi0 interface and not include it in any configuration. It is of no relevance in your setup. > I am aware that it is quite an old verison, although this is the > version that is currently in the openwrt repo. I will compile a more > recent version once i have the basics working i think. Ok. > Thanks for you help so far guys, two people have suggested MTU issues > now, so fingers crossed someone can see something wrong with the > output above? Could you post the config of both nodes ? That includes: * ifconfig * brctl show * ip route / route -n * cat /proc/net/batman-adv/interfaces * iptables (-t nat) -vnL [on the internet-router] Regards, Marek
