On Thursday 23 June 2016 14:54:37 Sailash Moirangthem wrote: [..] > I am trying to set-up mesh network using tplink WR1043ND routers and > raspberry pi B+ integrated with ra2800usb (wi pi). The tplink routers > are working as expected. Howoever, the raspberry pi is not working.
Sounds more like an OpenWrt/LEDE question. But I think the persons which
created the OpenWrt/LEDE scripts for batman-adv are subscribed to this
list.
> The configuration file for the Pi board is as follows:
>
[...]
> config interface 'mesh'
> option ifname 'adhoc0'
> option mtu '1528'
> option proto 'batadv'
> option mesh 'bat0'
[...]
Why are you adding the interface in /etc/config/wireless and not as
described in the quick start guide [1] to /etc/config/wireless? I would
suggest to try to use the /etc/config/wireless because these are
"dynamically" created interfaces and (not tested) should work better with
netifd.
Is it working when you do `batctl if add adhoc0`? Is something shown
in dmesg related to an error while adding the interface?
Kind regards,
Sven
[1] https://www.open-mesh.org/projects/batman-adv/wiki/Batman-adv-openwrt-config
signature.asc
Description: This is a digitally signed message part.
