On Thursday 23 June 2016 15:40:53 Sailash Moirangthem wrote: > My wireless configuration is: > > config wifi-iface wmesh > option device radio1 > option ifname adhoc0 > option network mesh > option mode adhoc > option ssid mesh > option bssid 02:ca:ca::ca:40 > option encryption none > > So, it is almost the same as mentioned in > [1] > https://www.open-mesh.org/projects/batman-adv/wiki/Batman-adv-openwrt-config > > Yes, I tried batctl if add adhoc0, and when i put batctl if.. it days > adhoc inactive.
Please show the output of "iw dev", "iw phy", "ip link" and "batctl if"
after you did the "batctl if add adhoc0".
> Nothing critical says in dmesg. One line is to increase the mtu from
> 1500 to 1532 for eth0.
Hm, this retracted information is not telling the whole story. You are
most likely not telling us about the other batman-adv messages. These
for example would tell us what interfaces are added/removed/activated/...
Kind regards,
Sven
signature.asc
Description: This is a digitally signed message part.
