On Wednesday 13 September 2006 05:16 pm, Arno Lehmann wrote:
> Hi,
>
> On 9/13/2006 11:59 PM, Michael Brennen wrote:
> > A quick followup on the mount request mail I just sent...
> >
> > Using the console I unmounted and remounted that volume, and it still
> > asks for a mount. Current status is below.
>
> Could you give the outout from the unmount and mount commands, and from
> 'sta sd=Q47'?
The current status command output was already below. :)
I will add the full set of messages at the end of this mail.
A question: how can I verify the volume label on this tape, FNI0016? Perhaps
that is not correct?
> If Bacula really is aware that the correct tape is loaded and everything
> else - media types, pool, slot, etc. - fits I'd be astonished.
>
> I suspect that either the tape loaded from slot 20 is not the volume
> requested ('update slots' command in that case!), that the tape label
> can not be read, that the slot number is wrong 0-based vs. 1-based?) or
> something like this.
In an earlier mail I noted that I had run 'update slots' from a fresh bacula
start, so that should match.
> Might be a bug, too, and then you'd need more details for the report
> anyway :-)
Fair enough. :)
> > Running Jobs:
> > JobId Level Name Status
> > ======================================================================
> > 138 Increme NNNNNN-Archive.2006-09-13_16.33.14 is waiting for a mount
> > request
> > ====
> >
> > Device status:
> > Autochanger "Q47" with devices:
> > "Drive-0" (/dev/nst0)
> > "Drive-1" (/dev/nst1)
> > "Drive-2" (/dev/nst2)
> > "Drive-3" (/dev/nst3)
> > Device "FileStorage" (/backup/bacula) is not open.
> > Device "Drive-0" (/dev/nst0) open but no Bacula volume is mounted.
> > Device is BLOCKED waiting for mount of volume "FNI0016".
> > Slot 20 is loaded in drive 0.
> > Total Bytes Read=0 Blocks Read=0 Bytes/block=0
> > Positioned at File=0 Block=0
> > Device "Drive-1" (/dev/nst1) is not open.
> > Drive 1 status unknown.
> > Device "Drive-2" (/dev/nst2) is not open.
> > Drive 2 status unknown.
> > Device "Drive-3" (/dev/nst3) is not open.
> > Drive 3 status unknown.
> > ====
> >
> > In Use Volume status:
> > FNI0016 on device "Drive-0" (/dev/nst0)
> > ====
Device status:
Autochanger "Q47" with devices:
"Drive-0" (/dev/nst0)
"Drive-1" (/dev/nst1)
"Drive-2" (/dev/nst2)
"Drive-3" (/dev/nst3)
Device "FileStorage" (/backup/bacula) is not open.
Device "Drive-0" (/dev/nst0) open but no Bacula volume is mounted.
Device is BLOCKED waiting for mount of volume "FNI0016".
Slot 20 is loaded in drive 0.
Total Bytes Read=0 Blocks Read=0 Bytes/block=0
Positioned at File=0 Block=0
Device "Drive-1" (/dev/nst1) is not open.
Drive 1 status unknown.
Device "Drive-2" (/dev/nst2) is not open.
Drive 2 status unknown.
Device "Drive-3" (/dev/nst3) is not open.
Drive 3 status unknown.
====
In Use Volume status:
FNI0016 on device "Drive-0" (/dev/nst0)
====
umount
The defined Storage resources are:
1: LocalDisk
2: Q47
Select Storage resource (1-2): 2
Enter autochanger drive[0]: 0
3307 Issuing autochanger "unload slot 20, drive 0" command.
3001 Device "Drive-0" (/dev/nst0) unmounted.
mount
The defined Storage resources are:
1: LocalDisk
2: Q47
Select Storage resource (1-2): 2
Enter autochanger drive[0]: 0
Enter autochanger slot: 20
3301 Issuing autochanger "loaded? drive 0" command.
3302 Autochanger "loaded? drive 0", result: nothing loaded.
3304 Issuing autochanger "load slot 20, drive 0" command.
3305 Autochanger "load slot 20, drive 0", status is OK.
3301 Issuing autochanger "loaded? drive 0" command.
3302 Autochanger "loaded? drive 0", result is Slot 20.
3905 Device "Drive-0" (/dev/nst0) open but no Bacula volume is mounted.
If this is not a blank tape, try unmounting and remounting the Volume.
13-Sep 17:29 archive-sd: 3301 Issuing autochanger "loaded? drive 0" command.
13-Sep 17:29 archive-sd: 3302 Autochanger "loaded? drive 0", result is Slot
20.
13-Sep 17:29 archive-sd: 3301 Issuing autochanger "loaded? drive 0" command.
13-Sep 17:29 archive-sd: 3302 Autochanger "loaded? drive 0", result is Slot
20.
13-Sep 17:30 archive-sd: Please mount Volume "FNI0016" on Storage Device
"Drive-0" (/dev/nst0) for Job Labdepotinc-Archive.2006-09-13_16.33.14
> stat storage=Q47
Device status:
Autochanger "Q47" with devices:
"Drive-0" (/dev/nst0)
"Drive-1" (/dev/nst1)
"Drive-2" (/dev/nst2)
"Drive-3" (/dev/nst3)
Device "FileStorage" (/backup/bacula) is not open.
Device "Drive-0" (/dev/nst0) open but no Bacula volume is mounted.
Device is BLOCKED waiting for mount of volume "FNI0016".
Slot 20 is loaded in drive 0.
Total Bytes Read=0 Blocks Read=0 Bytes/block=0
Positioned at File=0 Block=0
Device "Drive-1" (/dev/nst1) is not open.
Drive 1 status unknown.
Device "Drive-2" (/dev/nst2) is not open.
Drive 2 status unknown.
Device "Drive-3" (/dev/nst3) is not open.
Drive 3 status unknown.
====
In Use Volume status:
FNI0016 on device "Drive-0" (/dev/nst0)
====
-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
