El lun, 22-01-2007 a las 07:51 -0500, Dan Langille escribió:

> What version of FreeBSD?  What version of Bacula?

My bad, and thanks for the fast reply:

Bacula 1.38.11 on FreeBSD 6, and we're using as a library an HP MSL 2024
with a HP LTO3 Drive.

> 
> Have restores been run against these volumes?

Hmm, yes. Can this modify in any way the volume?

> Some other items you may wish to consider:
> 
>   BSF at EOM              = yes
>   Backward Space Record   = yes
>   Fast Forward Space File = yes
>   TWO EOF                 = ye

Last time i posted i had all those in my config, seems that there's a
bit of confusion on what options to use when using FreeBSD. When i
posted that i got this reply from Kern:

> > (*)BSF at EOM = yes
> > (*)Backward Space Record = no
> > (*)Fast Forward Space File = no
> > (*)TWO EOF = yes

>If you turn on the asterisked items, you cripple Bacula and guarantee
>poor 
>1970 tape drive type performance from what is otherwise a modern, fast
>drive.

So i'm guessing i need to enable some of those "compatibility" modes
with my drive. Problem is i don't really know how each of those affect
the drive...last time i had all those enabled, all worked fine except
for a mean time of 3 hours each "moving to the end of data"!

I can try one of those options at a time with btape, any wild guess or
preferred order is welcomed.
I would discard "Two EOF" since i think thats for the end of tape and i
have "seteotmode=1"

If someone can see anything in the tapeinfo also:

Tapeinfo, (got variable block size ok, etc..)
[EMAIL PROTECTED] /usr/local/etc]# tapeinfo -f /dev/pass0
Product Type: Tape Drive
Vendor ID: 'HP '
Product ID: 'Ultrium 2-SCSI '
Revision: 'S54W'
Attached Changer: No
SerialNumber: 'HU106371UC'
TapeAlert[50]:Undefined.
MinBlock:1
MaxBlock:16777215
Ready: yes
BufferedMode: yes
Medium Type: Not Loaded
Density Code: 0x42
BlockSize: 0
DataCompEnabled: yes
DataCompCapable: yes
DataDeCompEnabled: yes
CompType: 0x1
DeCompType: 0x1
BOP: yes
Block Position: 0

Regards,
-- 
José E. Molina
Técnico de Sistemas
Brújula
T. +34 971 433 909 - F. +34 971 433 910
www.brujula.es
___________________________
En el corazón de su negocio





-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users

Reply via email to