---------- Forwarded message ----------
From: John Drescher <[EMAIL PROTECTED]>
Date: Jul 9, 2007 5:19 PM
Subject: Re: [Bacula-users] New Exabyte Autochanger question
To: Richard White <[EMAIL PROTECTED]>
> Thanks. Here's what it shows me:
>
> mt: /dev/st0: Input/output error
>
> or
>
> mt: /dev/st0: No medium found
>
I think that is ok without a tape loaded.
> However, bacula is not happy with it. When I issue this command:
>
> *label barcode
>
> I lists the barcoded tapes in all the slots. However, when it attempts to
> label them, it throws this:
>
> Connecting to Storage daemon at bacula-test:9103 VXA
> Sending label command for Volume "A0000001" Slot 1 ...
> 3301 Issuing autochanger "loaded? drive 0" command.
> 3302 Autochanger "loaded? drive 0", result: nothing loaded.
> 3304 Issuing autchanger "load slot 1, drive 0" command.
> 3305 Autochanger "load slot 1, drive 0" status is OK.
> 3301 Issuing autochanger "loaded? drive 0" command.
> 3302 Autochanger "loaded? drive 0:, result is Slot 1.
> 3910 Unable to open device "VXA3" (dev/st0): ERR=dev.c:425 Unable to open
> device "VXA3" (dev/st0): ERR=Input/output error
>
> Label command failed for Volume A0000001
> Sending label command for Volume "A0000002" Slot 2 ...
>
> And so on.
>
> Here are the pertinent parts of my 'corrected' conf files:
>
>
I see a few things different with your bacula-sd.conf
Autochanger {
Name = Magnum224-0
Device = LTO2-0, LTO2-1
Changer Command = "/usr/libexec/bacula/mtx-changer %c %o %S %a %d"
# Changer Device = /dev/sg5
# 02/12/2007 added udev rule to link /dev/autochanger1 to the changer
Changer Device = /dev/autochanger1
}
Device {
Name = LTO2-0
Media Type = LTO-2
Drive Index = 0
Archive Device = /dev/nst0
Autochanger=yes
AutomaticMount = yes; # when device opened, read it
AlwaysOpen = yes;
RemovableMedia = yes;
RandomAccess = no;
Spool Directory = /mnt/tmp/bacula/tape
Maximum Job Spool Size = 2G
LabelMedia = Yes
Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
}
Device {
Name = LTO2-1
Media Type = LTO-2
Drive Index = 1
Archive Device = /dev/nst1
Autochanger=yes
AutomaticMount = yes; # when device opened, read it
AlwaysOpen = yes;
RemovableMedia = yes;
RandomAccess = no;
Spool Directory = /mnt/tmp/bacula/tape
Maximum Job Spool Size = 2G
LabelMedia = Yes
Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
}
The difference here is that I have Drive Index and no Changer command
or Changer Device in my Device definition.
And then the bacula-dir.conf
Storage {
Name = "DEV6-LTO-0"
Address = dev6.radimg.pitt.edu
SDPort = 9103
Password = "REMOVED" # Console password
Device = "LTO2-0"
Media Type = "LTO-2"
Maximum Concurrent Jobs = 5
}
Storage {
Name = "DEV6-LTO2-1"
Address = dev6.radimg.pitt.edu
SDPort = 9103
Password = "REMOVED" # Console password
Device = "LTO2-1"
Media Type = "LTO-2"
Maximum Concurrent Jobs = 5
}
Storage {
Name = "DEV6-Changer"
Address = dev6.radimg.pitt.edu
SDPort = 9103
Password = "REMOVED"
Device = "Magnum224-0"
Media Type = "LTO-2"
Maximum Concurrent Jobs = 5
}
Now for label barcodes I choose DEV6-Changer as the device.
John
--
John M. Drescher
-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
Bacula-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bacula-users