Hi, 06.07.2007 19:40,, Matthews, John W. wrote:: > > > Is there anyway to get bacula to "map" barcodes to Volume Names such that: > > 1) The Volume Names are different than the barcodes > > 2) "update" "slots from autochanger" will work without loading each tape > (i.e., bacula will know which volumes are loaded in which slots based > only on the barcodes)
You'd have to modify mtx-changer (or whatever changer command you use) accordingly. That wouldn't be too difficult, I think, but labeling will be really funny :-) Arno > > jwm > > John W. Matthews, D.Sc. > Image-guided Therapy QA Center > Department of Radiation Oncology > Washington University School of Medicine > 314-747-5413 > [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]> > > > > > > ------------------------------------------------------------------------ > > ------------------------------------------------------------------------- > This SF.net email is sponsored by DB2 Express > Download DB2 Express C - the FREE version of DB2 express and take > control of your XML. No limits. Just data. Click to get it now. > http://sourceforge.net/powerbar/db2/ > > > ------------------------------------------------------------------------ > > _______________________________________________ > Bacula-users mailing list > Bacula-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/bacula-users -- Arno Lehmann IT-Service Lehmann www.its-lehmann.de ------------------------------------------------------------------------- This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
