> > [a lot of old stuff snipped]
> >
> > I think you are now asking for help with the above messages, but you
> > haven't explicitly asked.
> >
> > When running btape, be sure bacula-sd is not running. That is your
> > firstcheck.
>
> The second check would be the permissions. If the SD runs as user
> bacula, make sure that user can write to /dev/nst0. Running a test as
> root is more likely to succeed :-)
>
Progress ! Thanks for the tips thus far. What next ? It does sort of
look like a permissions issue (despite all of this being performed as
uid 0):
# ps ax |fgrep -i acula
16835 pts/0 S+ 0:00 fgrep -i acula
# whoami
root
# ls -ald {/dev/sg2,/dev/st0,/dev/nst0}
crw-rw---- 1 root disk 9, 128 Dec 17 11:13 /dev/nst0
crw-rw---- 1 root disk 21, 2 Dec 17 11:13 /dev/sg2
crw-rw---- 1 root disk 9, 0 Dec 17 11:13 /dev/st0
# mtx -f /dev/sg2 load 1
# mtx -f /dev/sg2 status
Storage Changer /dev/sg2:1 Drives, 20 Slots ( 0 Import/Export )
Data Transfer Element 0:Full (Storage Element 1 Loaded):VolumeTag =
B00023L3
Storage Element 1:Empty
Storage Element 2:Full :VolumeTag=B00039L3
Storage Element 3:Full :VolumeTag=B00029L3
Storage Element 4:Full :VolumeTag=B00025L3
Storage Element 5:Full :VolumeTag=B00028L3
Storage Element 6:Full :VolumeTag=B00022L3
Storage Element 7:Full :VolumeTag=B00026L3
Storage Element 8:Full :VolumeTag=B00031L3
Storage Element 9:Full :VolumeTag=B00030L3
Storage Element 10:Full :VolumeTag=B00037L3
Storage Element 11:Full :VolumeTag=B00034L3
Storage Element 12:Full :VolumeTag=B00035L3
Storage Element 13:Full :VolumeTag=B00036L3
Storage Element 14:Full :VolumeTag=B00038L3
Storage Element 15:Full :VolumeTag=B00032L3
Storage Element 16:Full :VolumeTag=B00024L3
Storage Element 17:Full :VolumeTag=B00021L3
Storage Element 18:Full :VolumeTag=B00020L3
Storage Element 19:Full :VolumeTag=B00027L3
Storage Element 20:Full :VolumeTag=B00033L3
# mt -f /dev/nst0 status
SCSI 2 tape drive:
File number=0, block number=0, partition=0.
Tape block size 0 bytes. Density code 0x44 (no translation).
Soft error count since last status=0
General status bits on (41010000):
BOT ONLINE IM_REP_EN
[EMAIL PROTECTED] ~]# /usr/local/bacula-2.2.6/sbin/btape -v -c
/usr/local/bacula-2.2.6/etc/bacula-sd.conf /dev/nst0
Tape block granularity is 1024 bytes.
btape: butil.c:285 Using device: "/dev/nst0" for writing.
18-Dec 08:54 btape JobId 0: 3301 Issuing autochanger "loaded? drive 0"
command.
18-Dec 08:54 btape JobId 0: 3302 Autochanger "loaded? drive 0", result
is Slot 1.
18-Dec 08:54 btape JobId 0: 3301 Issuing autochanger "loaded? drive 0"
command.
18-Dec 08:54 btape JobId 0: 3302 Autochanger "loaded? drive 0", result
is Slot 1.
btape: btape.c:368 open device "LTO3-1" (/dev/nst0): OK
*test
=== Write, rewind, and re-read test ===
I'm going to write 1000 records and an EOF
then write 1000 records and an EOF, then rewind,
and re-read the data to verify that it is correct.
This is an *essential* feature ...
18-Dec 08:55 btape JobId 0: Error: block.c:569 Write error at 0:1 on
device "LTO3-1" (/dev/nst0). ERR=Input/output error.
18-Dec 08:56 btape JobId 0: Error: Backspace record at EOT failed.
ERR=Input/output error
btape: btape.c:823 Error writing block to device.
-------------------------------------------------------------------------
SF.Net email is sponsored by:
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services
for just about anything Open Source.
http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace
_______________________________________________
Bacula-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bacula-users
