could you please post the entire output from btape test?
-- michael
On Tue, Dec 18, 2007 at 08:59:30AM -0500, Robin Blanchard wrote:
> > > [a lot of old stuff snipped]
> > >
> > > I think you are now asking for help with the above messages, but you
> > > haven't explicitly asked.
> > >
> > > When running btape, be sure bacula-sd is not running. That is your
> > > firstcheck.
> >
> > The second check would be the permissions. If the SD runs as user
> > bacula, make sure that user can write to /dev/nst0. Running a test as
> > root is more likely to succeed :-)
> >
>
> Progress ! Thanks for the tips thus far. What next ? It does sort of
> look like a permissions issue (despite all of this being performed as
> uid 0):
>
> # ps ax |fgrep -i acula
> 16835 pts/0 S+ 0:00 fgrep -i acula
>
> # whoami
> root
>
> # ls -ald {/dev/sg2,/dev/st0,/dev/nst0}
> crw-rw---- 1 root disk 9, 128 Dec 17 11:13 /dev/nst0
> crw-rw---- 1 root disk 21, 2 Dec 17 11:13 /dev/sg2
> crw-rw---- 1 root disk 9, 0 Dec 17 11:13 /dev/st0
>
> # mtx -f /dev/sg2 load 1
>
> # mtx -f /dev/sg2 status
> Storage Changer /dev/sg2:1 Drives, 20 Slots ( 0 Import/Export )
> Data Transfer Element 0:Full (Storage Element 1 Loaded):VolumeTag =
> B00023L3
> Storage Element 1:Empty
> Storage Element 2:Full :VolumeTag=B00039L3
> Storage Element 3:Full :VolumeTag=B00029L3
> Storage Element 4:Full :VolumeTag=B00025L3
> Storage Element 5:Full :VolumeTag=B00028L3
> Storage Element 6:Full :VolumeTag=B00022L3
> Storage Element 7:Full :VolumeTag=B00026L3
> Storage Element 8:Full :VolumeTag=B00031L3
> Storage Element 9:Full :VolumeTag=B00030L3
> Storage Element 10:Full :VolumeTag=B00037L3
>
> Storage Element 11:Full :VolumeTag=B00034L3
>
> Storage Element 12:Full :VolumeTag=B00035L3
>
> Storage Element 13:Full :VolumeTag=B00036L3
>
> Storage Element 14:Full :VolumeTag=B00038L3
>
> Storage Element 15:Full :VolumeTag=B00032L3
>
> Storage Element 16:Full :VolumeTag=B00024L3
>
> Storage Element 17:Full :VolumeTag=B00021L3
>
> Storage Element 18:Full :VolumeTag=B00020L3
>
> Storage Element 19:Full :VolumeTag=B00027L3
>
> Storage Element 20:Full :VolumeTag=B00033L3
>
>
> # mt -f /dev/nst0 status
> SCSI 2 tape drive:
> File number=0, block number=0, partition=0.
> Tape block size 0 bytes. Density code 0x44 (no translation).
> Soft error count since last status=0
> General status bits on (41010000):
> BOT ONLINE IM_REP_EN
> [EMAIL PROTECTED] ~]# /usr/local/bacula-2.2.6/sbin/btape -v -c
> /usr/local/bacula-2.2.6/etc/bacula-sd.conf /dev/nst0
> Tape block granularity is 1024 bytes.
> btape: butil.c:285 Using device: "/dev/nst0" for writing.
> 18-Dec 08:54 btape JobId 0: 3301 Issuing autochanger "loaded? drive 0"
> command.
> 18-Dec 08:54 btape JobId 0: 3302 Autochanger "loaded? drive 0", result
> is Slot 1.
> 18-Dec 08:54 btape JobId 0: 3301 Issuing autochanger "loaded? drive 0"
> command.
> 18-Dec 08:54 btape JobId 0: 3302 Autochanger "loaded? drive 0", result
> is Slot 1.
> btape: btape.c:368 open device "LTO3-1" (/dev/nst0): OK
> *test
>
> === Write, rewind, and re-read test ===
>
> I'm going to write 1000 records and an EOF
> then write 1000 records and an EOF, then rewind,
> and re-read the data to verify that it is correct.
>
> This is an *essential* feature ...
>
> 18-Dec 08:55 btape JobId 0: Error: block.c:569 Write error at 0:1 on
> device "LTO3-1" (/dev/nst0). ERR=Input/output error.
> 18-Dec 08:56 btape JobId 0: Error: Backspace record at EOT failed.
> ERR=Input/output error
> btape: btape.c:823 Error writing block to device.
>
> -------------------------------------------------------------------------
> SF.Net email is sponsored by:
> Check out the new SourceForge.net Marketplace.
> It's the best place to buy or sell services
> for just about anything Open Source.
> http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace
> _______________________________________________
> Bacula-users mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/bacula-users
>
-------------------------------------------------------------------------
SF.Net email is sponsored by:
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services
for just about anything Open Source.
http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace
_______________________________________________
Bacula-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bacula-users
