I have been trying to add another tape drive to my server. These are not in
an autochanger, they are separate tape drives. I can access the tape drive
from
Linux with mt and as you will see in the documentation below btape worked as
well. But when I try to access the tape from bacula it does not see it.
I thought I had the configuration setup correctly but I must have missing
something. I need another "pair" of eyes to look at the SD and DIR config.
thanks
-------------------------------------------------------------------
label
The defined Storage resources are:
1: File
2: Quantum-DLT-V4
3: Quantum-DLT-V4-1
Select Storage resource (1-3): 3
Enter new Volume name: distress-mon0208
Defined Pools:
1: Default
2: Monthly
Select the Pool (1-2): 2
Connecting to Storage daemon Quantum-DLT-V4-1 at
distress.ACCOUNTING.EDT.LOCAL:9103 ...
Sending label command for Volume "distress-mon0208" Slot 0 ...
3999 Device "Quantum-DLT-1" not found or could not be opened.
Label command failed for Volume distress-mon0208.
Do not forget to mount the drive!!!
st stor
The defined Storage resources are:
1: File
2: Quantum-DLT-V4
3: Quantum-DLT-V4-1
Select Storage resource (1-3): 3
Connecting to Storage daemon Quantum-DLT-V4-1 at
distress.ACCOUNTING.EDT.LOCAL:9103
distress-sd Version: 2.0.3 (06 March 2007) i686-pc-linux-gnu redhat (Zod)
Daemon started 09-Jan-08 11:52, 11 Jobs run since started.
Heap: bytes=19,491 max_bytes=152,863 bufs=84 max_bufs=103
Running Jobs:
No Jobs running.
====
Jobs waiting to reserve a drive:
====
Terminated Jobs:
JobId Level Files Bytes Status Finished Name
===================================================================
1800 Incr 202 11.02 G OK 09-Jan-08 19:24 Futility
1801 Incr 114 995.0 M OK 09-Jan-08 20:07 Denial
1802 Incr 174 266.9 M OK 09-Jan-08 21:07 nestucca
1803 Incr 447 1.864 G OK 09-Jan-08 22:10 Bagby
1804 Full 35,512 15.28 G OK 09-Jan-08 22:41 Destruction
1805 Full 0 0 Other 09-Jan-08 23:11 Doom
1806 Incr 1,349 1.758 G OK 10-Jan-08 08:47 Gloom
1807 Incr 663 777.3 M OK 10-Jan-08 08:49 Distress
1808 Full 1 162.4 M OK 10-Jan-08 08:49 BackupCatalog
1809 Full 0 0 Cancel 10-Jan-08 14:43 Doom
====
Device status:
Device "FileStorage" (/backupdb/backup) is not open.
Device "Quantum-DLT" (/dev/nst0) is mounted with Volume="distress-010908"
Pool="Default"
Total Bytes=32,169,424,896 Blocks=498,657 Bytes/block=64,512
Positioned at File=36 Block=0
====
In Use Volume status:
distress-010908 on device "Quantum-DLT" (/dev/nst0)
====
[EMAIL PROTECTED] bin]# btape -c /usr/local/bacula/bin/bacula-sd.conf /dev/nst1
Tape block granularity is 1024 bytes.
btape: butil.c:286 Using device: "/dev/nst1" for writing.
btape: btape.c:368 open device "Quantum-DLT-1" (/dev/nst1): OK
*test
I'm going to write 1000 records and an EOF
then write 1000 records and an EOF, then rewind,
and re-read the data to verify that it is correct.
This is an *essential* feature ...
btape: btape.c:825 Wrote 1000 blocks of 64412 bytes.
btape: btape.c:499 Wrote 1 EOF to "Quantum-DLT-1" (/dev/nst1)
btape: btape.c:841 Wrote 1000 blocks of 64412 bytes.
btape: btape.c:499 Wrote 1 EOF to "Quantum-DLT-1" (/dev/nst1)
btape: btape.c:850 Rewind OK.
1000 blocks re-read correctly.
Got EOF on tape.
1000 blocks re-read correctly.
=== Test Succeeded. End Write, rewind, and re-read test ===
.... The test ran through without errors...only copied first part for brevity
bacula-sd.conf
Device {
Name = Quantum-DLT # First tape - daily and weekly
Drive Index = 0
Media Type = DLT-V4
Archive Device = /dev/nst0
AutomaticMount = no; # when device opened, read it
AlwaysOpen = yes;
RemovableMedia = yes;
RandomAccess = no;
AutoChanger = no
Device {
Name = Quantum-DLT-1 # Second tape - monthly and yearly
Drive Index = 1
Media Type = DLT-V4
Archive Device = /dev/nst1
AutomaticMount = no; # when device opened, read it
AlwaysOpen = yes;
RemovableMedia = yes;
RandomAccess = no;
AutoChanger = no
***bacula-dir.conf- storage device section
# Definition of DDS tape storage device
Storage {
Name = Quantum-DLT-V4
# Do not use "localhost" here
Address = distress.ACCOUNTING.EDT.LOCAL # N.B. Use a fully
qualified name here
SDPort = 9103
Password = "Dn91BxJ/wNTn+9u3OX4ef1iRBXh1/Ch2GBaNiQzoQ9ny" #
password for Storage daemon
Device = Quantum-DLT # must be same as Device in Storage daemon
Media Type = DLT-V4 # must be same as MediaType in Storage
daemon
# Autochanger = yes # enable for autochanger device
}
Storage {
Name = Quantum-DLT-V4-1
# Do not use "localhost" here
Address = distress.ACCOUNTING.EDT.LOCAL # N.B. Use a fully
qualified name here
SDPort = 9103
Password = "Dn91BxJ/wNTn+9u3OX4ef1iRBXh1/Ch2GBaNiQzoQ9ny" #
password for Storage daemon
Device = Quantum-DLT-1 # must be same as Device in Storage daemon
Media Type = DLT-V4 # must be same as MediaType in Storage
daemon
# Autochanger = yes # enable for autochanger device
}
-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
