allright, thank you very very much, I will look into it
On Feb 1, 2008 1:25 PM, John Drescher <[EMAIL PROTECTED]> wrote:
> On Feb 1, 2008 10:15 AM, Tyekanyk <[EMAIL PROTECTED]> wrote:
> > this error happen when any tape is loaded, not always, but in some cases
> > with no reason it happens, when I change the daily tapes for example...
> >
> > im running bacula 2.0.3 on a debian sarge... I do not have an
> autochanger
> > and I have 3 pools of tapes (daily, weekly, monthly with 4, 4, and 2
> > respectively).
> > the server that controls storage is a debian sarge, and where the
> director
> > runs is an etch...
> > this is the complete output of the bconsole error:
> >
> > 01-feb 02:02 adm-dir: Start Backup JobId 633,
> > Job=adm-mysql-diario.2008-02-01_02.00.00
> > 01-feb 02:02 adm-sd: Volume "vi" previously written, moving to end of
> data.
> >
> > 01-feb 02:04 adm-sd: adm-mysql-diario.2008-02-01_02.00.00 Error: Unable
> to
> > position to end of data on device "LTO" (/dev/nst0): ERR=dev.c:931 ioctl
> > MTIOCGET error on "LTO" (/dev/nst0). ERR=Input/output error.
> >
> The error above appears to be a timeout problem. I will take a look at
> this later. In the meantime you may want to do a google search with
> the following terms:
>
> bacula MTIOCGET
>
> I have seen a few discussions about MTIOCGET errors on this list before.
>
> John
>
--
-Jorixine-
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
