2010/8/11 Romer Ventura <rvent...@h-st.com>: > Hello, > I am running a full back up with a size of "estimate files=983,529 > bytes=306,761,539,624", the backup started normally and used up 1 full tape > 160GB (uncompressed), then it switched tapes and continued to copy data to > the second tape, but all of the sudden it stops and bacula starts > complaining with: "JobId 2: Warning: Unable add Scratch Volume, Pool > "Full-Pool-dsk-tpe" full MaxVols=2" > list media shows: > +---------+------------+-----------+---------+-----------------+----------+--------------+---------+------+-----------+-----------+---------------------+ > | MediaId | VolumeName | VolStatus | Enabled | VolBytes | VolFiles | > VolRetention | Recycle | Slot | InChanger | MediaType | LastWritten > | > +---------+------------+-----------+---------+-----------------+----------+--------------+---------+------+-----------+-----------+---------------------+ > | 1 | CNH910 | Full | 1 | 164,989,504,512 | 166 | > 2,592,000 | 1 | 1 | 1 | tape | 2010-08-10 20:53:33 > | > | 2 | CNH911 | Used | 1 | 142,552,940,544 | 143 | > 2,592,000 | 1 | 2 | 1 | tape | 2010-08-11 00:53:24 > | > +---------+------------+-----------+---------+-----------------+----------+--------------+---------+------+-----------+-----------+---------------------+ > Both tapes are the same, both of them are capable of storing 160GB of > uncompressed data. Why is it still asking for more tapes? > Also, status on director shows: > Running Jobs: > Console connected at 10-Aug-10 16:13 > JobId Level Name Status > ====================================================================== > 2 Full H34-FileServ-dsk-tap.2010-08-10_22.00.00_08 is waiting for an > appendable Volume > 3 Full H34-FileServ-dsk-dsk.2010-08-10_22.00.00_09 is waiting on max > Client jobs > 4 Full BackupCatalog.2010-08-10_23.10.00_10 is waiting for higher > priority jobs to finish > ==== > Terminated Jobs: > JobId Level Files Bytes Status Finished Name > ==================================================================== > 1 Full 983,490 307.0 G OK 11-Aug-10 00:55 > H34-FileServ-dsk-tap > Why is the backup still running even when it is shown in "Terminated Jobs" > with OK status..? > Thanks
That is a different job. Job 1 finished and wrote 307GB. For some reason you are running the H34-FileServ-dsk-tap job 2 times. John ------------------------------------------------------------------------------ This SF.net email is sponsored by Make an app they can't live without Enter the BlackBerry Developer Challenge http://p.sf.net/sfu/RIM-dev2dev _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users