Could it be the schedule..? Well since i havent got a full backup, i
manually ran the full backup job. Does this mean that since the job
scheduled for the 1st sunday hadnt run, bacula scheduled and tried to
run it as if it was the 1st sun?
Shouldnt bacula check for the a full backup for the same job and then
just do the incremental job? or manually ran jobs do not count on
this checks bacula does...?
Well the schedule is:
Schedule {
Name = "WeeklyCycle"
Run = Level=Full Pool=Full-Pool-dsk-tpe 1st sun at 20:00
Run = Level=Differential Pool=Diff-Pool-dsk-tpe 2nd-5th sun at 20:00
Run = Level=Incremental Pool=Incre-Pool-dsk-dsk mon-fri at 22:00
}
And the pools:
Pool {
Name = Full-Pool-dsk-tpe
Pool Type = Backup
Recycle = yes
AutoPrune = yes
Volume Retention = 1 months
Maximum Volume Jobs = 1
# Label Format = Full-
Maximum Volumes = 2
}
Pool {
Name = Diff-Pool-dsk-tpe
Pool Type = Backup
Recycle = yes
AutoPrune = yes
Volume Retention = 1 months
Maximum Volume Jobs = 1
# Label Format = Full-
Maximum Volumes = 3
}
Pool {
Name = Incre-Pool-dsk-dsk
Pool Type = Backup
Recycle = yes
AutoPrune = yes
Volume Retention = 5 days
Maximum Volume Jobs = 1
Label Format = IncreFileServ-
Maximum Volumes = 5
}
Thanks
------
Romer Ventura
On Aug 11, 2010, at 9:36 AM, John Drescher wrote:
2010/8/11 Romer Ventura <rvent...@h-st.com>:
Hello,
I am running a full back up with a size of "estimate files=983,529
bytes=306,761,539,624", the backup started normally and used up 1
full tape
160GB (uncompressed), then it switched tapes and continued to copy
data to
the second tape, but all of the sudden it stops and bacula starts
complaining with: "JobId 2: Warning: Unable add Scratch Volume, Pool
"Full-Pool-dsk-tpe" full MaxVols=2"
list media shows:
+---------+------------+-----------+---------+-----------------
+----------+--------------+---------+------+-----------+-----------
+---------------------+
| MediaId | VolumeName | VolStatus | Enabled | VolBytes |
VolFiles |
VolRetention | Recycle | Slot | InChanger | MediaType | LastWritten
|
+---------+------------+-----------+---------+-----------------
+----------+--------------+---------+------+-----------+-----------
+---------------------+
| 1 | CNH910 | Full | 1 | 164,989,504,512
| 166 |
2,592,000 | 1 | 1 | 1 | tape | 2010-08-10
20:53:33
|
| 2 | CNH911 | Used | 1 | 142,552,940,544
| 143 |
2,592,000 | 1 | 2 | 1 | tape | 2010-08-11
00:53:24
|
+---------+------------+-----------+---------+-----------------
+----------+--------------+---------+------+-----------+-----------
+---------------------+
Both tapes are the same, both of them are capable of storing 160GB of
uncompressed data. Why is it still asking for more tapes?
Also, status on director shows:
Running Jobs:
Console connected at 10-Aug-10 16:13
JobId Level Name Status
=====================================================================
=
2 Full H34-FileServ-dsk-tap.2010-08-10_22.00.00_08 is
waiting for an
appendable Volume
3 Full H34-FileServ-dsk-dsk.2010-08-10_22.00.00_09 is
waiting on max
Client jobs
4 Full BackupCatalog.2010-08-10_23.10.00_10 is waiting for
higher
priority jobs to finish
====
Terminated Jobs:
JobId Level Files Bytes Status Finished Name
====================================================================
1 Full 983,490 307.0 G OK 11-Aug-10 00:55
H34-FileServ-dsk-tap
Why is the backup still running even when it is shown in
"Terminated Jobs"
with OK status..?
Thanks
That is a different job. Job 1 finished and wrote 307GB. For some
reason you are running the H34-FileServ-dsk-tap job 2 times.
John
------------------------------------------------------------------------------
This SF.net email is sponsored by
Make an app they can't live without
Enter the BlackBerry Developer Challenge
http://p.sf.net/sfu/RIM-dev2dev
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
