Ok, so i've got it working now, but I run into 1 problem. When I run this: # btape /dev/nst0 Tape block granularity is 1024 bytes. btape: butil.c:285 Using device: "/dev/nst0" for writing. 03-Aug 10:49 btape JobId 0: 3301 Issuing autochanger "loaded? drive 0" command. 03-Aug 10:49 btape JobId 0: 3302 Autochanger "loaded? drive 0", result: nothing loaded. 03-Aug 10:49 btape: Fatal Error at device.c:298 because: dev open failed: dev.c:491 Unable to open device "LTO5" (/dev/nst0): ERR=No medium found
I know this is because there is not tape in there. I thought it would run without it. If the tape is in the drive I run into the problem where it wants to test the autochanger. Then I tell it yes and I get this: === End Forward space files test === Ah, I see you have an autochanger configured. To test the autochanger you must have a blank tape that I can write on in Slot 1. Do you wish to continue with the Autochanger test? (y/n): y === Autochanger test === 3301 Issuing autochanger "loaded" command. Nothing loaded in the drive. OK. 3303 Issuing autochanger "load 1 0" command. It just sits there doing nothing, I guess it is supposed to remove the tape from the drive and put the tape from slot 1 into the drive but that doesn't seem to happen +---------------------------------------------------------------------- |This was sent by lok...@gmail.com via Backup Central. |Forward SPAM to ab...@backupcentral.com. +---------------------------------------------------------------------- ------------------------------------------------------------------------------ BlackBerry® DevCon Americas, Oct. 18-20, San Francisco, CA The must-attend event for mobile developers. Connect with experts. Get tools for creating Super Apps. See the latest technologies. Sessions, hands-on labs, demos & much more. Register early & save! http://p.sf.net/sfu/rim-blackberry-1 _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
