Hi,
Seems that changing the Fibber do the trick. More that 30GB are copied
now to LT05 Tape without any troubles.
Regards, I
2013/8/20 Clark, Patricia A. <clar...@ornl.gov>
> Possibly the fiber cable? Can you swap it out and try again?
> I had 20 fiber connections and one of them needed replacing. It made the
> drive look bad from the server, but the library did not report any error
> conditions with the drive.
>
> Patti Clark
> Linux System Administrator
> Research and Development Systems Support Oak Ridge National Laboratory
>
> From: Iban Cabrillo <cabri...@ifca.unican.es<mailto:
> cabri...@ifca.unican.es>>
> Date: Tuesday, August 20, 2013 12:45 PM
> To: Radosław Korzeniewski <rados...@korzeniewski.net<mailto:
> rados...@korzeniewski.net>>
> Cc: Bacula Users <Bacula-users@lists.sourceforge.net<mailto:
> Bacula-users@lists.sourceforge.net>>
> Subject: Re: [Bacula-users] LIP reset occurred (0), device removed.
>
> Hi,
> this is the qlogic driver version:
>
> [ 1.348682] qla2xxx [0000:07:00.0]-00fa:1: QLogic Fibre Channed HBA
> Driver: 8.03.07.12-k.
> [ 1.348686] qla2xxx [0000:07:00.0]-00fb:1: QLogic QLE2562 - QLogic 8Gb
> FC Dual-port HBA for System x.
> [ 1.348699] qla2xxx [0000:07:00.0]-00fc:1: ISP2532: PCIe (2.5GT/s x8) @
> 0000:07:00.0 hdma+ host#=1 fw=5.06.05 (90d5).
> [ 1.348768] qla2xxx [0000:07:00.1]-001d: : Found an ISP2532 irq 19
> iobase 0xffffc90000c68000.
> [ 1.348949] qla2xxx 0000:07:00.1: irq 44 for MSI/MSI-X
> [ 1.348956] qla2xxx 0000:07:00.1: irq 45 for MSI/MSI-X
> [ 1.349023] qla2xxx [0000:07:00.1]-0040:2: Configuring PCI space...
> [ 1.349028] qla2xxx 0000:07:00.1: setting latency timer to 64
> [ 1.361424] qla2xxx [0000:07:00.1]-0061:2: Configure NVRAM parameters...
> [ 1.369088] qla2xxx [0000:07:00.1]-0078:2: Verifying loaded RISC code...
> [ 1.369131] qla2xxx [0000:07:00.1]-0092:2: Loading via request-firmware.
> [ 1.400994] qla2xxx [0000:07:00.1]-00c0:2: Allocate (64 KB) for FCE...
> [ 1.401064] qla2xxx [0000:07:00.1]-00c3:2: Allocated (64 KB) EFT ...
> [ 1.401150] qla2xxx [0000:07:00.1]-00c5:2: Allocated (1350 KB) for
> firmware dump.
> [ 1.405503] scsi2 : qla2xxx
> [ 1.405763] qla2xxx [0000:07:00.1]-00fa:2: QLogic Fibre Channed HBA
> Driver: 8.03.07.12-k.
> [ 1.405767] qla2xxx [0000:07:00.1]-00fb:2: QLogic QLE2562 - QLogic 8Gb
> FC Dual-port HBA for System x.
> [ 1.405779] qla2xxx [0000:07:00.1]-00fc:2: ISP2532: PCIe (2.5GT/s x8) @
> 0000:07:00.1 hdma+ host#=2 fw=5.06.05 (90d5).
> ......
> [ 2.928979] scsi 1:0:0:0: Sequential-Access IBM ULT3580-TD3
> 93GP PQ: 0 ANSI: 3
> [ 2.935530] st: Version 20101219, fixed bufsize 32768, s/g segs 256
> [ 2.935861] st 1:0:0:0: Attached scsi tape st0
> [ 2.935864] st 1:0:0:0: st0: try direct i/o: yes (alignment 4 B)
> [ 3.939166] qla2xxx [0000:07:00.1]-500a:2: LOOP UP detected (8 Gbps).
> [ 3.997944] scsi 2:0:0:0: Sequential-Access IBM ULT3580-TD5
> C7RC PQ: 0 ANSI: 6
> [ 4.000531] scsi 2:0:0:1: Medium Changer IBM 03584L32
> B570 PQ: 0 ANSI: 6
> [ 4.012583] st 2:0:0:0: Attached scsi tape st1
> [ 4.012586] st 2:0:0:0: st1: try direct i/o: yes (alignment 4 B)
> [ 4.013947] osst :I: Tape driver with OnStream support version 0.99.4
> [ 4.013948] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
> [ 4.014691] SCSI Media Changer driver v0.25
> [ 4.016286] ch0: type #1 (mt): 0x1+2 [medium transport]
> [ 4.016289] ch0: type #2 (st): 0x401+1601 [storage]
> [ 4.016291] ch0: type #3 (ie): 0x301+10 [import/export]
> [ 4.016293] ch0: type #4 (dt): 0x101+2 [data transfer]
>
>
> [1:0:0:0] tape IBM ULT3580-TD3 93GP /dev/st0
> [2:0:0:0] tape IBM ULT3580-TD5 C7RC /dev/st1
> [2:0:0:1] mediumx IBM 03584L32 B570 /dev/sch0
>
> Some times the reset hapends whwn a few MBs are written others after a
> couple of hundred MBs but only when we use the LTO5 ([2:0:0:0] tape
> IBM ULT3580-TD5 C7RC /dev/st1 ) the LT03 always works grate.
>
> the linux kernel running is :
> Linux bacula 3.2.0-4-amd64 #1 SMP Debian 3.2.46-1 x86_64 GNU/Linux
>
> and the bacula-sd configuration for LT05 tape:
> Device {
> # The TSM3100's second t3pe drive
> Name = ULT3580-TD5
> Archive Device = /dev/nst1
> Device Type = Tape
> Media Type = LTO-5
> Autochanger = Yes
> # Changer Device = <inherited from Changer>
> Alert Command = "sh -c '/usr/sbin/tapeinfo -f /dev/sg1 | /bin/sed -n
> /TapeAlert/p"
> Drive Index = 0
> RemovableMedia = yes
> Random Access = no
> Maximum Block Size = 262144
> Maximum Network Buffer Size = 262144
> Maximum Spool Size = 20gb
> Maximum Job Spool Size = 10gb
> Spool Directory = /backup/spool
> AutomaticMount = Yes;
> }
>
> root@bacula:~# /usr/sbin/tapeinfo -f /dev/sg1
> Product Type: Tape Drive
> Vendor ID: 'IBM '
> Product ID: 'ULT3580-TD5 '
> Revision: 'C7RC'
> Attached Changer API: No
> SerialNumber: '00078ABB4C'
> MinBlock: 1
> MaxBlock: 8388608
> SCSI ID: 0
> SCSI LUN: 0
> Ready: yes
> BufferedMode: yes
> Medium Type: 0x58
> Density Code: 0x58
> BlockSize: 0
> DataCompEnabled: yes
> DataCompCapable: yes
> DataDeCompEnabled: yes
> CompType: 0x1
> DeCompType: 0x1
> Block Position: 582
> Partition 0 Remaining Kbytes: -1
> Partition 0 Size in Kbytes: -1
> ActivePartition: 0
> EarlyWarningSize: 0
> NumPartitions: 0
> MaxPartitions: 1
>
> I appreciate any help. thanks in advance I.
>
>
> 2013/8/19 Radosław Korzeniewski <rados...@korzeniewski.net<mailto:
> rados...@korzeniewski.net>>
> Hello,
>
> 2013/8/19 Iban Cabrillo <cabri...@ifca.unican.es<mailto:
> cabri...@ifca.unican.es>>
> Hi, Any Idea?
> Seems something related to bacula, I have tried chaging the FC port, but
> the result has been the same
>
>
> FC LIP reset is not related to Bacula - IMHO. I had the same problem but
> with a changer device. The problem was a second server which accidentally
> accessed the same target (at random time). When I switch off the second
> server the problem was cured. Sure, your problem could has a different
> origin then my, and YMMV. BTW, what kernel tape driver do you use (Linux
> stock)?
>
> best regards
> --
> Radosław Korzeniewski
> rados...@korzeniewski.net<mailto:rados...@korzeniewski.net>
>
>
>
> --
> ####################################
> Iban Cabrillo Bartolome
> Instituto de Fisica de Cantabria (IFCA)
> Santander, Spain
> Tel: +34942200969
> ####################################
> Bertrand Russell:
> "El problema con el mundo es que los estúpidos están seguros de todo y los
> inteligentes están llenos de dudas"
>
>
> ------------------------------------------------------------------------------
> Introducing Performance Central, a new site from SourceForge and
> AppDynamics. Performance Central is your source for news, insights,
> analysis and resources for efficient Application Performance Management.
> Visit us today!
> http://pubads.g.doubleclick.net/gampad/clk?id=48897511&iu=/4140/ostg.clktrk
> _______________________________________________
> Bacula-users mailing list
> Bacula-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/bacula-users
>
--
####################################
Iban Cabrillo Bartolome
Instituto de Fisica de Cantabria (IFCA)
Santander, Spain
Tel: +34942200969
####################################
Bertrand Russell:
*"El problema con el mundo es que los estúpidos están seguros de todo y los
inteligentes están llenos de dudas*"
------------------------------------------------------------------------------
Introducing Performance Central, a new site from SourceForge and
AppDynamics. Performance Central is your source for news, insights,
analysis and resources for efficient Application Performance Management.
Visit us today!
http://pubads.g.doubleclick.net/gampad/clk?id=48897511&iu=/4140/ostg.clktrk
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
