Hi Olaf,

Sorry I was out a few days.... Have you tested your Bacula with these "fake
passwords"? Or you have just changed them for posting here? I found no
errors in your passwords configurations, but I'm not sure if you are using
these ones posted here. In the case you're not, could you verify your
director to storage daemon password configuration (not the one for
communicating with monitor)? The error message points to a mismatch here.

Best regards,
Ana

On Tue, Jun 23, 2015 at 11:04 AM, olx69 <ope-li...@gmx.de> wrote:

> Am 18.06.2015 um 16:13 schrieb olx69:
> > Hello Ana,
> >
> >> Sorry I'm late in this post.
> >> It seems there is still some password mismatching problems. Could you
> >> post your resources definitions for monitor (in bacula-dir.conf,
> >> bacula-fd.conf and bacula-sd.conf) and your tray-monitor.conf?
> >
> > thank you for investigating! attached the files,
>
> no idea? Here the reduced password related part. Imo all is correct,
> isn't it?
>
>
> -------bacula-traymon.conf------
> Monitor {
>    Name = bacula-tux64-mon
>    Password = "MON_DIR_PASSWORD"         # password for the Directors
>    RefreshInterval = 3 seconds
> }
> Client {
>    Name = bacula-tux64-fd
>    Address = tux64.home.lan
>    Password = "MON_FD_PASSWORD"          # password for FileDaemon
> }
> Storage {
>    Name = bacula-tux64-sd
>    Address = tux64.home.lan
>    Password = "MON_SD_PASSWORD"          # password for StorageDaemon
> }
> Director {
>    Name = bacula-tux64-dir
>    Address = tux64.home.lan
> }
> ----bacula-dir-full.conf----
> Director {
>    Name = bacula-tux64-dir
>    Password = "DIR_PASSWORD"    # BConsole password
> ....
> }
> Console {
>    Name = bacula-tux64-mon
>    Password = "MON_DIR_PASSWORD"
> ...
> }
> Client {
>    Name = bacula-tux64-fd
>    Password = "FD_PASSWORD"            # password for FileDaemon
> ...
> }
> -----bacula-fd-full.conf-----
> Director {
>    Name = bacula-tux64-dir
>    Password = "FD_PASSWORD"
> }
> Director {
>    Name = bacula-tux64-mon
>    Password = "MON_FD_PASSWORD"
> }
> ----bacula-sd-full.conf-----
> Director {
>    Name = bacula-tux64-dir
>    Password = "SD_PASSWORD"
> }
> Director {
>    Name = bacula-tux64-mon
>    Password = "MON_SD_PASSWORD"
> ...
> }
>
>
> ------------------------------------------------------------------------------
> Monitor 25 network devices or servers for free with OpManager!
> OpManager is web-based network management software that monitors
> network devices and physical & virtual servers, alerts via email & sms
> for fault. Monitor 25 devices for free with no restriction. Download now
> http://ad.doubleclick.net/ddm/clk/292181274;119417398;o
> _______________________________________________
> Bacula-users mailing list
> Bacula-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/bacula-users
>
------------------------------------------------------------------------------
Monitor 25 network devices or servers for free with OpManager!
OpManager is web-based network management software that monitors 
network devices and physical & virtual servers, alerts via email & sms 
for fault. Monitor 25 devices for free with no restriction. Download now
http://ad.doubleclick.net/ddm/clk/292181274;119417398;o
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users

Reply via email to