On 2019-04-12 12:03, Wanderlei Huttel wrote:
> Hello Sruckh
>
> Try to use the rclone from this repository
> https://github.com/wanderleihuttel/rclone-changer
>
> Best regards
>
> WANDERLEI HÜTTEL
> http://www.bacula.com.br [1]
Thank you for the suggestion.
I was using script from this repository
https://github.com/travisgroth/rclone-changer
I have now downloaded the version from
https://github.com/wanderleihuttel/rclone-changer
I changed the shebang to match my environment for python 3.6. I updated
the variable section with the same details as before. I connected to
bconsole and re-ran the label command (label barcodes storage=Cloud_b2
pool=Offsite); same as before.
The new script seemed to take the variables as configured in the
configuration section, which is good.
Both scripts caused similar results from bconsole:
<SNIP>
Sending label command for Volume "VTAPE-0500" Slot 500 ...
3307 Issuing autochanger "unload Volume VTAPE-0499, Slot 499, Drive 0"
command.
3304 Issuing autochanger "load Volume VTAPE-0500, Slot 500, Drive 0"
command.
3305 Autochanger "load Volume VTAPE-0500, Slot 500, Drive 0", status is
OK.
Too many tries: Wrong Volume mounted on Vtape device "BaculaVTL"
(/zfsstore/backups/bacula/vtape/tape): Wanted VTAPE-0500 have
VTAPE-00001
3920 Cannot label Volume because it is already labeled: "VTAPE-00001"
Label command failed for Volume VTAPE-0500.
</SNIP>
A bunch of directories did get created in the backblaze bucket along
with a single file in each directory. Which seem similar to the
experiences posted here ( http://bit.ly/2DdCXvY ).
I will have to go back and verify the configuration again, and possibly
start over with a clean slate just in case something got messed up with
the older script.
Thank You.
Links:
------
[1] http://www.bacula.com.br/
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
