Hello Martin,
Yes, correct Bacula (and Bacula Systems) does not yet release source
code because we have a patent pending on the technique. Working with the
USPTO on this particular patent is very frustrating. We are also
working with the EU patent reviewers, and though it takes time, the
process is moving forward nicely (I hope).
I will talk to the package builder to see if he (or possibly the QA
department) can test and possibly fix the binaries.
Best regards,
Kern
On 7/18/19 12:27 PM, Martin Simmons wrote:
I can see why Bacula Systems don't make the SOURCE available yet, but shipping
a useless binary package is probably not what they intended so you should ask
them about it.
__Martin
On Thu, 18 Jul 2019 11:30:32 +0200, Olivier Delestre said:
Hi,
All my servers are install with the Bacula Community packages from repo :
baseurl=http://bacula.org/packages/xxxxxxxxxxxxxxxxx/rpms/9.4.4/el7/x86_64
bacula-aligned.x86_64 9.4.4-1.el7 @Bacula-Community
bacula-libs.x86_64 9.4.4-1.el7 @Bacula-Community
bacula-postgresql.x86_64 9.4.4-1.el7 @Bacula-Community
--
/opt/bacula/plugins/
-rwxr-x---. 1 root bacula 7776 Jun 25 10:41
bacula-sd-aligned-driver-9.4.4.so
--
And in my conf sd :
Storage { # definition of myself
Name = xxxx-sd
SDPort = 9103 # Director's port
WorkingDirectory = "/opt/bacula/working"
Pid Directory = "/opt/bacula/working"
### NEW 9.0.8
Plugin Directory = "/opt/bacula/plugins"
###
I just notice that the community version still does not have this
feature ( Aligned Volume ).
https://www.bacula.org/bacula-binary-package-download/
"and Bacula Systems has been advised that the source should not be made
available until the patent is granted."
Thanks. and let us know when it is available.
Le 17/07/2019 à 14:34, Martin Simmons a écrit :
The open source code contains a null aligned driver, but if your
/opt/bacula/plugins/bacula-sd-aligned-driver-9.4.4.so was installed from the
Bacula Community packages then you will have to ask Bacula Systems about it
(https://www.bacula.org/bacula-binary-package-download/).
__Martin
On Wed, 17 Jul 2019 11:53:45 +0200, Olivier Delestre said:
Hi,
I'm sure the aligned volume works in July 2018 for my test ( with older
version than 9.4.4 ).
I remenber i have 2 files generate for the "tape" ( Test001 and
Test001.add ).
But not today.
The Plugin is still avalaible with the Bacula 9.4.4 ??
Le 11/07/2019 à 18:49, J W a écrit :
I just installed Bacula 9.44 Community and am backing up to a ZFS
drive. It works fine with a regular setup.
If I switch to using the Aligned device type then I get the error
below. I switched back to a regular setup but would like to use
deduplication since it would save me a lot of space because my full
backups are 5 TB but most of the files are not changing between ful
backups.
-------------------------------------------------------------------------------------------------------------------------
Device "Aligned-Disk" requested by DIR could not be opened or
does not exist.
11-Jul 09:29 jw-sd JobId 13: Error: [SE0003] Lookup of symbol
"BaculaSDdriver" in driver Aligned-Disk for device
/opt/bacula/plugins/bacula-sd-aligned-driver-9.4.4.so
<http://bacula-sd-aligned-driver-9.4.4.so> failed:
ERR=/opt/bacula/plugins/bacula-sd-aligned-driver-9.4.4.so
<http://bacula-sd-aligned-driver-9.4.4.so>: undefined symbol:
BaculaSDdriver
---------------------------------------------------------------------------------------------------------------------------
My OS is latest Centos 7. I installed Bacula from the Bacula 9.4.4
repo. It appeared to install the plugin successfuly. Yum shows it as
installed. It seems like Bacula is finding it since it lists the
correct path to the plugin.
I set up Bacula for deduplication using the directions at
http://www.bacula.lat/block-level-deduplication-with-aligned-volumes-tutorial-bacula-7-9-9-0-and-above/?lang=en.
See my device entry quoted further down below.
I ran a few programs on the plugin to show the symbols but they do not
show BaculaSDdriver in the plugin. I do not really know what I am
doing with that. I also looked at the plugin itself for text with this
value but did not see it.
I saw a post (wsee below) where someone has the same problem with
9.4.3. I could not figure out how to reply to that post since I just
joined the bacula-users list today.
Any idea how to fix this problem or if it is a bug?
Thanks,
Joe
*[Bacula-users] Aligned volumes support - Bacula Community 9.4.3
<https://sourceforge.net/p/bacula/mailman/message/36712185/>*
From: Pedro Freire Popiolek <p.f.popiolek@fu...> - 2019-07-08 23:26:41
--------------------------------------------------------------------------------------------------------------------------------------
Bacula-Community]
name=CentOS - Bacula - Community
baseurl=http://www.bacula.org/packages/zmyKeyWasHere/rpms/9.4.4/el7/x86_64/
enabled=1
protect=0
gpgcheck=1
--------------------------------------------------------------------------------------------------------------------------------------
ls -l
total 52
-rwxr-x---. 1 root bacula 7776 Jun 25 04:41
bacula-sd-aligned-driver-9.4.4.so
<http://bacula-sd-aligned-driver-9.4.4.so>
-rwxr-x---. 1 root bacula 44592 Jun 25 04:40 bpipe-fd.so
[root@jw plugins]# pwd
/opt/bacula/plugins
[root@jw plugins]#
-----------------------------------------------------------------------------------------------------------------------------------
Device entry from bacula-sd.conf
-----------------------------------------------------------------------------------------------------------------------------------
Device {
Name = Aligned-Disk
Device Type = Aligned # Must be aligned
Media Type = File1
Archive Device = /mpool1 # Or /mnt/ddumbfs.mnt if ddumfs mounting
point.
LabelMedia = yes;
Random Access = Yes;
AutomaticMount = yes;
RemovableMedia = no;
AlwaysOpen = no;
Maximum Concurrent Jobs = 1 # Always 1 for Aligned
Minimum Block Size=0K
Maximum Block Size=128K
File Alignment=128K
Padding Size=512
Minimum Aligned Size=4096
}
-------------------------------------------------------------------------------------------------------
nm -gC bacula-sd-aligned-driver-9.4.4.so
<http://bacula-sd-aligned-driver-9.4.4.so>
0000000000201018 B __bss_start
w __cxa_finalize@@GLIBC_2.2.5
0000000000201018 D _edata
0000000000201020 B _end
0000000000000608 T _fini
w __gmon_start__
00000000000004e0 T _init
w _ITM_deregisterTMCloneTable
w _ITM_registerTMCloneTable
w _Jv_RegisterClasses
------------------------------------------------------------------------------------------------
[root@jw plugins]# readelf -Ws bacula-sd-aligned-driver-9.4.4.so
<http://bacula-sd-aligned-driver-9.4.4.so>
Symbol table '.dynsym' contains 11 entries:
Num: Value Size Type Bind Vis Ndx Name
0: 0000000000000000 0 NOTYPE LOCAL DEFAULT UND
1: 0000000000000000 0 NOTYPE WEAK DEFAULT UND __gmon_start__
2: 0000000000000000 0 NOTYPE WEAK DEFAULT UND
_Jv_RegisterClasses
3: 0000000000000000 0 NOTYPE WEAK DEFAULT UND
_ITM_deregisterTMCloneTable
4: 0000000000000000 0 NOTYPE WEAK DEFAULT UND
_ITM_registerTMCloneTable
5: 0000000000000000 0 FUNC WEAK DEFAULT UND
__cxa_finalize@GLIBC_2.2.5 (2)
6: 0000000000201020 0 NOTYPE GLOBAL DEFAULT 21 _end
7: 0000000000201018 0 NOTYPE GLOBAL DEFAULT 20 _edata
8: 0000000000201018 0 NOTYPE GLOBAL DEFAULT 21 __bss_start
9: 00000000000004e0 0 FUNC GLOBAL DEFAULT 8 _init
10: 0000000000000608 0 FUNC GLOBAL DEFAULT 12 _fini
Symbol table '.symtab' contains 53 entries:
Num: Value Size Type Bind Vis Ndx Name
0: 0000000000000000 0 NOTYPE LOCAL DEFAULT UND
1: 0000000000000190 0 SECTION LOCAL DEFAULT 1
2: 00000000000001b8 0 SECTION LOCAL DEFAULT 2
3: 00000000000001f0 0 SECTION LOCAL DEFAULT 3
4: 00000000000002f8 0 SECTION LOCAL DEFAULT 4
5: 00000000000003e4 0 SECTION LOCAL DEFAULT 5
6: 0000000000000400 0 SECTION LOCAL DEFAULT 6
7: 0000000000000420 0 SECTION LOCAL DEFAULT 7
8: 00000000000004e0 0 SECTION LOCAL DEFAULT 8
9: 0000000000000500 0 SECTION LOCAL DEFAULT 9
10: 0000000000000510 0 SECTION LOCAL DEFAULT 10
11: 0000000000000520 0 SECTION LOCAL DEFAULT 11
12: 0000000000000608 0 SECTION LOCAL DEFAULT 12
13: 0000000000000618 0 SECTION LOCAL DEFAULT 13
14: 0000000000200de8 0 SECTION LOCAL DEFAULT 14
15: 0000000000200df0 0 SECTION LOCAL DEFAULT 15
16: 0000000000200df8 0 SECTION LOCAL DEFAULT 16
17: 0000000000200e00 0 SECTION LOCAL DEFAULT 17
18: 0000000000200e08 0 SECTION LOCAL DEFAULT 18
19: 0000000000200fd8 0 SECTION LOCAL DEFAULT 19
20: 0000000000201000 0 SECTION LOCAL DEFAULT 20
21: 0000000000201018 0 SECTION LOCAL DEFAULT 21
22: 0000000000000000 0 SECTION LOCAL DEFAULT 22
23: 0000000000000000 0 FILE LOCAL DEFAULT ABS crtstuff.c
24: 0000000000200df8 0 OBJECT LOCAL DEFAULT 16 __JCR_LIST__
25: 0000000000000520 0 FUNC LOCAL DEFAULT 11
deregister_tm_clones
26: 0000000000000550 0 FUNC LOCAL DEFAULT 11
register_tm_clones
27: 0000000000000590 0 FUNC LOCAL DEFAULT 11
__do_global_dtors_aux
28: 0000000000201018 1 OBJECT LOCAL DEFAULT 21 completed.6355
29: 0000000000200df0 0 OBJECT LOCAL DEFAULT 15
__do_global_dtors_aux_fini_array_entry
30: 00000000000005d0 0 FUNC LOCAL DEFAULT 11 frame_dummy
31: 0000000000200de8 0 OBJECT LOCAL DEFAULT 14
__frame_dummy_init_array_entry
32: 0000000000000000 0 FILE LOCAL DEFAULT ABS aligned_dev.c
33: 0000000000000000 0 FILE LOCAL DEFAULT ABS aligned_read.c
34: 0000000000000000 0 FILE LOCAL DEFAULT ABS aligned_write.c
35: 0000000000000000 0 FILE LOCAL DEFAULT ABS crtstuff.c
36: 0000000000000618 0 OBJECT LOCAL DEFAULT 13 __FRAME_END__
37: 0000000000200df8 0 OBJECT LOCAL DEFAULT 16 __JCR_END__
38: 0000000000000000 0 FILE LOCAL DEFAULT ABS
39: 0000000000201000 0 OBJECT LOCAL DEFAULT 20
_GLOBAL_OFFSET_TABLE_
40: 0000000000201018 0 OBJECT LOCAL DEFAULT 20 __TMC_END__
41: 0000000000200e00 0 OBJECT LOCAL DEFAULT 17 __dso_handle
42: 0000000000200e08 0 OBJECT LOCAL DEFAULT 18 _DYNAMIC
43: 0000000000000000 0 NOTYPE WEAK DEFAULT UND __gmon_start__
44: 0000000000000000 0 NOTYPE WEAK DEFAULT UND
_Jv_RegisterClasses
45: 0000000000000608 0 FUNC GLOBAL DEFAULT 12 _fini
46: 0000000000000000 0 NOTYPE WEAK DEFAULT UND
_ITM_deregisterTMCloneTable
47: 0000000000000000 0 NOTYPE WEAK DEFAULT UND
_ITM_registerTMCloneTable
48: 0000000000000000 0 FUNC WEAK DEFAULT UND
__cxa_finalize@@GLIBC_2.2.5
49: 0000000000201018 0 NOTYPE GLOBAL DEFAULT 21 __bss_start
50: 0000000000201020 0 NOTYPE GLOBAL DEFAULT 21 _end
51: 0000000000201018 0 NOTYPE GLOBAL DEFAULT 20 _edata
52: 00000000000004e0 0 FUNC GLOBAL DEFAULT 8 _init
Le corps de ce message sera téléchargé à votre demande.
Le corps de ce message sera téléchargé à votre demande.
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
