Le Wed, 23 May 2012 12:43:47 +0200, Roberto Nibali <rnib...@gmail.com> a écrit : > Set the switches to boot from SD on the mx25 device and power on. It > successfully loads barebox and I can mount the fat partition (of course the > other partition is unmountable, because there is no ext2/3 support in > barebox). Booting from my environment currently fails, but I reckon it has > to do with my configuration settings. Here is where it gets so far: > .../... > [ 103.029081] VFS: Unable to mount root fs via NFS, trying floppy. > [ 103.036763] VFS: Cannot open root device "nfs" or unknown-block(2,0) > [ 103.043157] Please append a correct "root=" boot option; here are the > available partitions: > [ 103.052007] b300 1955840 mmcblk0 driver: mmcblk > [ 103.057512] b301 1024 mmcblk0p1 > 00000000-0000-0000-0000-000000000mmcblk0p1 > [ 103.065670] b302 524288 mmcblk0p2 > 00000000-0000-0000-0000-000000000mmcblk0p2 > [ 103.073744] b303 1429504 mmcblk0p3 > 00000000-0000-0000-0000-000000000mmcblk0p3 > .../... > Thank you very much for your pointers. > add to your bootargs root=/dev/mmcblk0p3 rootfstype=ext3 or something like this
Eric _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox