Hi Doug Brainard,

On 02/10/2015 10:28 PM, Doug Brainard wrote:
---
  arch/arm/boards/sama5d4ek/env/config | 14 +++++++-------
  1 file changed, 7 insertions(+), 7 deletions(-)

As this file will be totally discard in patch 2/2. So, I think no need to add this patch. And also it change the default boot setting to Android only.

diff --git a/arch/arm/boards/sama5d4ek/env/config 
b/arch/arm/boards/sama5d4ek/env/config
index 1007345..ee86c07 100644
--- a/arch/arm/boards/sama5d4ek/env/config
+++ b/arch/arm/boards/sama5d4ek/env/config
@@ -11,16 +11,16 @@ ip=dhcp
  #eth0.serverip=a.b.c.d

  # can be either 'nfs', 'tftp', 'nor' or 'nand'
-kernel_loc=nfs
+kernel_loc=nand
  # can be either 'net', 'nor', 'nand' or 'initrd'
-rootfs_loc=net
+rootfs_loc=nand
  # can be either 'nfs', 'tftp', 'nand' or empty
-oftree_loc=nfs
+oftree_loc=nand

  # can be either 'jffs2' or 'ubifs'
  rootfs_type=ubifs
  rootfsimage=root.$rootfs_type
-ubiroot=rootfs
+ubiroot=system

  # The image type of the kernel. Can be uimage, zimage, raw, or raw_lzo
  kernelimage=zImage
@@ -29,14 +29,14 @@ kernelimage=zImage
  #kernelimage=Image.lzo

  nand_device=atmel_nand
-nand_parts="256k(at91bootstrap),512k(barebox)ro,256k(bareboxenv),256k(bareboxenv2),256k(spare),512k(oftree),6M(kernel),-(rootfs)"
-rootfs_mtdblock_nand=7
+nand_parts="256k(at91bootstrap),512k(barebox)ro,256k(bareboxenv),256k(bareboxenv2),256k(spare),512k(oftree),6M(kernel),8M(recovery),176M(system),304M(userdata),-(cache)"
+rootfs_mtdblock_nand=10

  
m25p80_parts="64k(bootstrap),384k(barebox),256k(bareboxenv),256k(bareboxenv2),128k(oftree),-(updater)"

  autoboot_timeout=3

-bootargs="console=ttyS0,115200"
+bootargs="console=ttyS0,115200 ubi.mtd=8 ubi.mtd=9 init=/init 
androidboot.hardware=sama5-pda androidboot.lcd=wvga"

  # set a fancy prompt (if support is compiled in)
  PS1="\e[1;32mbarebox@\e[1;31m\h:\w\e[0m\n# "


Best Regards,
Bo Shen

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

Reply via email to