From: Marc Kleine-Budde <m...@pengutronix.de> This syncs the known Micrel PHY IDs and register definitions with the Linux kernel, commit f600bb612b06adf70ccdefbd3294c71275b650c2.
Signed-off-by: Marc Kleine-Budde <m...@pengutronix.de> Signed-off-by: Stefan Kerkmann <s.kerkm...@pengutronix.de> --- include/linux/micrel_phy.h | 49 +++++++++++++++++++++++++++++++++++++++------- 1 file changed, 42 insertions(+), 7 deletions(-) diff --git a/include/linux/micrel_phy.h b/include/linux/micrel_phy.h index 8752dbbc61..591bf5b5e8 100644 --- a/include/linux/micrel_phy.h +++ b/include/linux/micrel_phy.h @@ -1,26 +1,26 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * include/linux/micrel_phy.h * * Micrel PHY IDs - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * */ #ifndef _MICREL_PHY_H #define _MICREL_PHY_H +#define MICREL_OUI 0x0885 + #define MICREL_PHY_ID_MASK 0x00fffff0 #define PHY_ID_KSZ8873MLL 0x000e7237 #define PHY_ID_KSZ9021 0x00221610 +#define PHY_ID_KSZ9021RLRN 0x00221611 #define PHY_ID_KS8737 0x00221720 #define PHY_ID_KSZ8021 0x00221555 #define PHY_ID_KSZ8031 0x00221556 #define PHY_ID_KSZ8041 0x00221510 +/* undocumented */ +#define PHY_ID_KSZ8041RNLI 0x00221537 #define PHY_ID_KSZ8051 0x00221550 /* same id: ks8001 Rev. A/B, and ks8721 Rev 3. */ #define PHY_ID_KSZ8001 0x0022161A @@ -28,11 +28,46 @@ #define PHY_ID_KSZ8081 0x00221560 #define PHY_ID_KSZ8061 0x00221570 #define PHY_ID_KSZ9031 0x00221620 +#define PHY_ID_KSZ9131 0x00221640 +#define PHY_ID_LAN8814 0x00221660 +#define PHY_ID_LAN8804 0x00221670 +#define PHY_ID_LAN8841 0x00221650 #define PHY_ID_KSZ886X 0x00221430 #define PHY_ID_KSZ8863 0x00221435 +#define PHY_ID_KSZ87XX 0x00221550 + +#define PHY_ID_KSZ9477 0x00221631 + /* struct phy_device dev_flags definitions */ -#define MICREL_PHY_50MHZ_CLK 0x00000001 +#define MICREL_PHY_50MHZ_CLK BIT(0) +#define MICREL_PHY_FXEN BIT(1) +#define MICREL_KSZ8_P1_ERRATA BIT(2) +#define MICREL_NO_EEE BIT(3) + +#define MICREL_KSZ9021_EXTREG_CTRL 0xB +#define MICREL_KSZ9021_EXTREG_DATA_WRITE 0xC +#define MICREL_KSZ9021_RGMII_CLK_CTRL_PAD_SCEW 0x104 +#define MICREL_KSZ9021_RGMII_RX_DATA_PAD_SCEW 0x105 + +/* Device specific MII_BMCR (Reg 0) bits */ +/* 1 = HP Auto MDI/MDI-X mode, 0 = Microchip Auto MDI/MDI-X mode */ +#define KSZ886X_BMCR_HP_MDIX BIT(5) +/* 1 = Force MDI (transmit on RXP/RXM pins), 0 = Normal operation + * (transmit on TXP/TXM pins) + */ +#define KSZ886X_BMCR_FORCE_MDI BIT(4) +/* 1 = Disable auto MDI-X */ +#define KSZ886X_BMCR_DISABLE_AUTO_MDIX BIT(3) +#define KSZ886X_BMCR_DISABLE_FAR_END_FAULT BIT(2) +#define KSZ886X_BMCR_DISABLE_TRANSMIT BIT(1) +#define KSZ886X_BMCR_DISABLE_LED BIT(0) + +/* PHY Special Control/Status Register (Reg 31) */ +#define KSZ886X_CTRL_MDIX_STAT BIT(4) +#define KSZ886X_CTRL_FORCE_LINK BIT(3) +#define KSZ886X_CTRL_PWRSAVE BIT(2) +#define KSZ886X_CTRL_REMOTE_LOOPBACK BIT(1) #endif /* _MICREL_PHY_H */ -- 2.39.2
