Hello Ahmad,
On 11.03.24 11:05, Ahmad Fatoum wrote:
> On 11.03.24 10:10, Stefan Kerkmann wrote:
>> +/dts-v1/;
>> +
>> +#include "imx8mp-karo-qsxp-ml81.dts"
>> +
>> +&{/} {
>
> While not wrong, this is unnecessary. We know that there is a / already.
>
Ack.
>> + model = "Ka-Ro electronics QSXP-ML81-QSBASE4 (NXP i.MX8MP) Board";
>> + compatible = "karo,imx8mp-qsxp-ml81-qsbase4", "karo,imx8mp-qsxp-ml81",
>> "fsl,imx8mp";
>
> Ok, this confuses me. I thought QSXP is the SoM. What's ML81?
The official part number from karo is `QSXP-ML81`, it is just not
mentioned upfront on their product page - but you'll see it under
`Varianten` at https://www.karo-electronics.de/qsxp#c12158. Therefore I
vote to keep the `ml81` part.
>
>
>> +&usdhc2 {
>> + status = "disabled";
>> +};
>
> Nitpick: Should be disabled in SoM, as it requires outside hardware to be
> functional.
>
Ack.
>> +
>> +&iomuxc {
>> + pinctrl_eqos: eqosgrp {
>> + fsl,pins = <
>> + MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22 0x140
>> /* PHY reset */
>> + MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC 0x142
>> + MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO 0x142
>> +
>> MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x40000016
>> + MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0 0x016
>> + MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1 0x016
>> + MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2 0x016
>> + MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3 0x016
>> + MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x016
>> + MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0 0x110
>> /* MODE0 */
>> + MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1 0x150
>> /* MODE1 */
>> + MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2 0x150
>> /* MODE2 */
>> + MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3 0x150
>> /* MODE3 */
>> +
>> MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x156 /*
>> PHYAD2 */
>> + MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x000
>> /* CLK125_EN */
>> + MX8MP_IOMUXC_GPIO1_IO00__CCM_ENET_PHY_REF_CLK_ROOT
>> 0x110 /* LED_MODE */
>> + >;
>> + };
>> +
>> + pinctrl_eqos_sleep: eqos-sleep-grp {
>> + fsl,pins = <
>> + MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22 0x120
>> + MX8MP_IOMUXC_ENET_MDC__GPIO1_IO16 0x120
>> + MX8MP_IOMUXC_ENET_MDIO__GPIO1_IO17 0x120
>> + MX8MP_IOMUXC_ENET_TXC__GPIO1_IO23 0x120
>> + MX8MP_IOMUXC_ENET_TD0__GPIO1_IO21 0x120
>> + MX8MP_IOMUXC_ENET_TD1__GPIO1_IO20 0x120
>> + MX8MP_IOMUXC_ENET_TD2__GPIO1_IO19 0x120
>> + MX8MP_IOMUXC_ENET_TD3__GPIO1_IO18 0x120
>> + MX8MP_IOMUXC_ENET_TX_CTL__GPIO1_IO22 0x120
>> + MX8MP_IOMUXC_ENET_RD0__GPIO1_IO26 0x120
>> + MX8MP_IOMUXC_ENET_RD1__GPIO1_IO27 0x120
>> + MX8MP_IOMUXC_ENET_RD2__GPIO1_IO28 0x120
>> + MX8MP_IOMUXC_ENET_RD3__GPIO1_IO29 0x120
>> + MX8MP_IOMUXC_ENET_RXC__GPIO1_IO25 0x120
>> + MX8MP_IOMUXC_ENET_RX_CTL__GPIO1_IO24 0x120
>> + MX8MP_IOMUXC_GPIO1_IO00__GPIO1_IO00 0x120
>> + >;
>> + };
>> +};
>>
>
--
Pengutronix e.K. | Stefan Kerkmann |
Steuerwalder Str. 21 | https://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-128 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-9 |
