Hi Andreas,
are you sure you did not use hardware compression on the HP drive? The
compression algorithms are vendor specific. Maybe try with a HP LTO6 drive?
Best regards,
Kai
Am 02.11.2017 um 11:38 schrieb [email protected]:
Hello,
we are testing our desaster restore and with this the question arises
if it is really possible to restore for example LTO-4 tapes with a
LTO-6 drive/changer?
We are failed to do so with LTO-4 tapes written by some HP drive
reading with a IBM LTO-6 drive. The error from Bareos 15.2 is :
30-Okt 14:44 bareos-sd JobId 5: Ready to read from volume "000028L4"
on device "Drive-1" (/dev/nst0).
30-Okt 14:44 bareos-sd JobId 5: Error: block.c:1003 Read error on fd=6
at file:blk 0:0 on device "Drive-1" (/dev/nst0). ERR=Device or
resource busy.
According to the specs LTO-4 should be readable by LTO-6 drives? Do we
need to set some read-only flag in Bareos SD or is it a common problem
with compatibility?
Thanks
Andreas
--
You received this message because you are subscribed to the Google Groups
"bareos-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To post to this group, send email to [email protected].
For more options, visit https://groups.google.com/d/optout.
