Hi.

I just compiled and installed barry on a FC7 box without much trouble.

However btool doesn't recognize any devices connected.

from /proc/bus/usb/devices I see:

T:  Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#=  7 Spd=12  MxCh= 0
D:  Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=16 #Cfgs=  1
P:  Vendor=0fca ProdID=0006 Rev= 1.06
S:  Manufacturer=Research In Motion
S:  Product=RIM Mass Storage Device
S:  SerialNumber=0E5F6E7C245CFF73A2CA068559FB0224217F914D
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E:  Ad=89(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=0a(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms


and I even tried btool -B 3 -N 7    and still no luck.  All I get is
[EMAIL PROTECTED] ~]$ btool
Blackberry devices found:
No device selected


When I plug the 8310 in I do get a system message:

usb 3-2: new full speed USB device using uhci_hcd and address 7
usb 3-2: configuration #1 chosen from 1 choice
scsi11 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 7
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete
scsi 11:0:0:0: Direct-Access     RIM      BlackBerry SD    0001 PQ: 0
ANSI: 4 CCS
sd 11:0:0:0: [sdd] Attached SCSI removable disk
sd 11:0:0:0: Attached scsi generic sg6 type 0
usb 3-2: USB disconnect, address 7
usb 3-2: new full speed USB device using uhci_hcd and address 8
usb 3-2: configuration #1 chosen from 1 choice
scsi12 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 8
usb-storage: waiting for device to settle before scanning


Why is it showing up as a scsi drive or a mass storage device.  Is that
what I should see?

Any help appreciated.

Don


-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
Barry-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/barry-devel

Reply via email to