That is exactly why I say in the instructions to use DC power. Gerald
On Wed, Oct 2, 2013 at 3:59 PM, Michael Vittiglio < michael.vittig...@gmail.com> wrote: > OK, so now I can see where things went wrong. I had been flashing the BBB > with it connected to my laptop (which would explain why my USB ports were > killed later that day). This makes me believe that the issue is that the > eMMC was disrupted during the flashing process. However, would this also > create issues with booting to the microSD after the fact? I will be getting > an FTDI connector tomorrow to help troubleshoot the issue and see what's > really happening on the board. > > On Wednesday, October 2, 2013 4:00:10 PM UTC-4, Gerald wrote: > >> Nope. The link that is on the little white card that came in the box with >> the board. >> >> http://circuitco.com/support/**BeagleBoneBlack<http://circuitco.com/support/BeagleBoneBlack> >> . >> >> Gerald >> >> >> >> On Wed, Oct 2, 2013 at 2:03 PM, Michael Vittiglio >> <michael....@gmail.com>wrote: >> >>> I presume you're referring to this: >>> http://elinux.org/**BeagleBoard<http://elinux.org/BeagleBoard> >>> >>> >>> On Wednesday, October 2, 2013 11:18:12 AM UTC-4, Gerald wrote: >>> >>>> Yes, please use my Wiki Follow it to the letter. No shortcuts. No USB >>>> power. No Ethernet. >>>> >>>> Gerald >>>> >>>> >>>> On Tue, Oct 1, 2013 at 7:39 PM, Michael Vittiglio < >>>> michael....@gmail.com> wrote: >>>> >>>>> I used the instructions at this URL: http://beagleboard.org/**Ge** >>>>> tting%20Started <http://beagleboard.org/Getting%20Started>. >>>>> I got the latest image from this one: http://beagleboard.org/**la** >>>>> test-images <http://beagleboard.org/latest-images> (I used the top >>>>> image). >>>>> >>>>> I would later be informed in the IRC channel to use the image found on >>>>> this URL: http://circuitco.com/**supp**ort/index.php?title=**Updating_ >>>>> **The_Software<http://circuitco.com/support/index.php?title=Updating_The_Software>(production >>>>> image 2013.09.04) >>>>> >>>>> >>>>> On Sunday, September 29, 2013 6:58:58 PM UTC-4, Gerald wrote: >>>>> >>>>>> You most likely did something wrong. Which instructions did you >>>>>> follow? >>>>>> >>>>>> Gerald >>>>>> >>>>>> >>>>>> >>>>>> On Sun, Sep 29, 2013 at 5:57 PM, Michael Vittiglio < >>>>>> michael....@gmail.com> wrote: >>>>>> >>>>>>> I managed to try and flash my BBB with the image on the website but >>>>>>> after it completed the process and I tried to reboot the board simply >>>>>>> does >>>>>>> not work. I tried booting again via SD card, turning off the power, >>>>>>> changing to another type of SD card, changing power supply and nothing >>>>>>> will >>>>>>> make the device stir. Is there any way I can absolutely verify that >>>>>>> there's >>>>>>> no way to repair this guy (or see if it's completely dead vs "mostly >>>>>>> dead")? I'm lured by very technical challenges but the internet seems >>>>>>> to be >>>>>>> failing me at the moment. >>>>>>> >>>>>>> If nothing else, can there be a RMA? I purchased this device at the >>>>>>> maker faire last weekend. >>>>>>> >>>>>>> Thanks. >>>>>>> >>>>>>> -- >>>>>>> For more options, visit http://beagleboard.org/discuss >>>>>>> --- >>>>>>> You received this message because you are subscribed to the Google >>>>>>> Groups "BeagleBoard" group. >>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>> send an email to beagleboard...@**googlegroups.**co**m. >>>>>>> >>>>>>> For more options, visit https://groups.google.com/**grou**** >>>>>>> ps/opt_out <https://groups.google.com/groups/opt_out>. >>>>>>> >>>>>> >>>>>> -- >>>>> For more options, visit http://beagleboard.org/discuss >>>>> --- >>>>> You received this message because you are subscribed to the Google >>>>> Groups "BeagleBoard" group. >>>>> To unsubscribe from this group and stop receiving emails from it, send >>>>> an email to beagleboard...@**googlegroups.**com. >>>>> For more options, visit >>>>> https://groups.google.com/**grou**ps/opt_out<https://groups.google.com/groups/opt_out> >>>>> . >>>>> >>>> >>>> -- >>> For more options, visit http://beagleboard.org/discuss >>> --- >>> You received this message because you are subscribed to the Google >>> Groups "BeagleBoard" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to beagleboard...@**googlegroups.com. >>> For more options, visit >>> https://groups.google.com/**groups/opt_out<https://groups.google.com/groups/opt_out> >>> . >>> >> >> -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to beagleboard+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/groups/opt_out. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out.