It's P9.18, P9.17 - there's nothing in the logs either I'm afraid. On 31 December 2013 16:55, Robert Nelson <robertcnel...@gmail.com> wrote:
> On Tue, Dec 31, 2013 at 10:34 AM, Mike Bremford <m...@bfo.com> wrote: > > I see what you're doing, patching am335x which is presumably loaded > directly > > by the kernel on boot - much simpler than loading after the boot I guess. > > > > So they load no problem, and I have UART1, 2 and 4! Nice work!. I have to > > dig out a complicated wiring harness to actually test them, but the > devices > > are present - will check for correct later. I'm BBB so UART5 will have to > > keep. > > > > Testing ADC, I2C and SPI is easy, the devices are soldered to the board > so > > just let me know what you need me to do. FWIW. saw you had an > > "enable-i2c-1.diff" in that folder too, tried it but although the > /dev/i2c-1 > > was created, a bus scan incorrectly finds no devices. > > Crap, but thanks for testing! Which pins are you using for i2c1?.. > > P9.18, P9.17: enable-i2c-1.diff > P9.26, P9.24: enable-i2c-1-alt-pins.diff > > Regards, > > -- > Robert Nelson > http://www.rcn-ee.com/ > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to beagleboard+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/groups/opt_out. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out.