On Mon, Mar 3, 2014 at 3:31 PM, rdbirt <rdb...@gmail.com> wrote: > HiAll, > > I have built kernel version 3.13.5 for the Beagleboard-xM. At boot it hangs > at "Starting kernel ..." (see capture below). Has any one had success with > 3.13? > > Regards, > Ralph > > > U-Boot SPL (Feb 28 2014 - 11:58:43) > reading u-boot.img > reading u-boot.img > > > U-Boot 2014.04-rc1-00190-geeb72e6 (Feb 28 2014 - 11:59:40) > > OMAP36XX/37XX-GP ES1.2, CPU-OPP2, L3-200MHz, Max CPU Clock 1 Ghz > OMAP3 Beagle board + LPDDR/NAND > I2C: ready > DRAM: 512 MiB > NAND: 0 MiB > MMC: OMAP SD/MMC: 0 > *** Warning - readenv() failed, using default environment > > In: serial > Out: serial > Err: serial > Beagle xM Rev C > Timed out in wait_for_event: status=0000 > Check if pads/pull-ups of bus 1 are properly configured > No EEPROM on expansion board > Die ID #023200029ff80000016849a90301801c > Net: usb_ether > Hit any key to stop autoboot: 0 > mmc0 is current device > gpio: pin 173 (gpio 173) value is 0 > gpio: pin 4 (gpio 4) value is 0 > SD/MMC found on device 0 > reading uEnv.txt > 106 bytes read in 3 ms (34.2 KiB/s) > Loaded environment from uEnv.txt > Importing environment from mmc ... > ** File not found /boot/uImage ** > Booting from nand ... > > no devices available > Wrong Image Format for bootm command > ERROR: can't get kernel image!
mainline u-boot is looking for "uImage" at /boot/. so fix that.. Or use the patches posted here: http://eewiki.net/display/linuxonarm/BeagleBoard Regards, -- Robert Nelson http://www.rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out.