Can you share a schematic with me? I can't visualize what you are doing. Gerald
On Tue, Mar 4, 2014 at 5:05 PM, Dorian Levy <dorianal...@gmail.com> wrote: > I am building a robot that uses an 11.7V battery. I tried attaching a 5V > regulator to the T5(+)/T8(-) (pins with the T6(SENSE) bridged to T5 and a > 10K resistor between T8(TS) and ground. The board only stays on for about > thirty seconds then shuts down. Is it because of the TS? What type of > thermistor does it use? Or should I try to use the barrel jack since > it's not directly connected to a battery? > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to beagleboard+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/groups/opt_out. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out.