1) Insert your SD card with a good image of Angstrom or Ubuntu. 2) Hold boot button down 3) Hold power button down until the power LED flashes 4) Wait until you see all 4 LEDs light up and release the boot button 5) Your BBB will now load off of the SD card image and you should have unbricked your BBB.
On Tuesday, December 17, 2013 5:54:14 AM UTC-6, moha...@gmail.com wrote: > > Hi All, > Please help me out. I was rebuilding the kernel of Beaglebone but > I followed 2-3 links together instead of following one link. I had the SD > card on the beaglebone which seems to have been corrupted. When I plug in > my Beaglebone into my PC, it does not detect and no mass storage device > recognized on my PC. It also did not detect on 2 other systems. When we > usually plug in the BBB, the Leds flash but now they are not flashing and > the power is flowing but now I dont know what the heck is going on. > I have Windows 7 as my host and Ubuntu on my VMWARE. But it seems it is > not getting detected. Can anyone tell me a solution how to enable > everything back to normal or is it I have to give a wake up call to the > board? Please help. > > Thanks in advance. > > Regards, > Suman Saurabh Mohanty. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out.
